Tag Archives: polyurthane floor coating

Orange County Polished Concrete, Orange County Garage Concrete Flooring, Concrete Polishing Orange County

Orange County Polished Concrete. Orange County Concrete Grinding. Polished concrete flooring is hot. Orange County polished concrete. Airplane hangars to polished concrete industrial floor prep. Polished concrete?  We do polished concrete throughout Orange County and Los Angeles Areas. A Perfect polished concrete floor is the goal. Polished concrete in Orange County and Los Angeles also San Diego. Concrete floor resurfacing with www.thekingsofconcrete.com.  Commercial polished concrete is often protected from wear and dusting with topical sealers and coatings. Resurfacing with these sealers and coatings can range in cost from 50 cents per s.f. for topical sealers, to $5 per s.f. for epoxy and urethane coatings. Compare coatings to polished concrete. Polished concrete prices will range from $3-7 per s.f. for a 3,000 grit finish based on size of the project and the number of obstacles. “A 3,000 grit finish includes the use of an impregnating sealer that reacts with the polished concrete and fills the surface voids,” says Roy.

Polished Concrete

949 387-5770

Polished Concrete Orange County is half to one third the cost of concrete flooring overlay concrete floor coatings, but that’s not where the savings really lie. “Polished concrete improves the overall quality of the floor resurfacing,” says Poinsettia Byrd with VIC International. The long-term maintenance costs can be astronomical for a commercial floor. Businesses such as manufactures, department stores, restaurants, and car dealers use polishing because coatings and sealers can have issues such as delaminating, staining and wear through. The life of some of these finishes can often be measured in months, resulting in constant up-keep. Polished concrete resurfacing produces an extremely dense, abrasion resistant surface that will not delaminate.

Polished concrete resurfacing surface may lose some of its shine over time in areas of heavy fork lift and foot traffic. The shine for polished concrete can be brought back with minimal aggravation and cost. The only maintenance a polished concrete floors will need is the removal of abrasives such as sand. Depending on the use of the floor, cleaning with a light detergent may also be needed. The service life of polished concrete cannot be determined as of yet since it is a fairly new process. But some existing polished concrete jobs that see heavy forklift traffic are over 5 years old and performing well with minimal maintenance.

Other benefits that commercial and industrial property owners see in polished concrete are reflectance, slip resistance, low VOC’s polished concrete Polished concrete resurfacing is expanding and developing many new techniques and products for the Polished Concrete floor Industry. The polished concrete industry is in a crucial point as there are many contractors that do subpar work and call it Polished Concrete resurfacing .” Thus a need for an independent Polished Concrete technical institute that “IT IS THE INTENT OF THE INSTITUTE to establish standards through accreditation, and to provide quality education and support for Architects, Engineers, General Contractors, Property Owners, Interior Designers, and Polished Concrete Resurfacing/Polished Concrete Contractors Resurfacing / Polished Concrete Resurfacing The Polished Concrete Resurfacing Association of America has also:

  1. ✓Defined the polished concrete processing process and its complexities.
  1. ✓Defined the functional and aesthetic advantages and disadvantages of ground, honed and polished concrete Resurfacing .
  1. ✓Defined the polished concrete flooring options available when processing polished concrete to a desired finisha.
  1. ✓Brought true craftsmanship and professionalism to the polished concrete industry through contractor evaluations, accreditations and training.
  1. ✓Developed written specifications that provide the desired results for the customer to include the concrete mix design, placement, finishing, joint layout, the ground, honed or polished concrete finish to protection.
  1. ✓Provided tools for polished concrete Resurfacing contractors to further develop their business in sales, marketing, estimating, business operations and development, including meeting the American Institute of Architects (AIA) Continuing Education System (CES) credit requirements for polished concrete resurfacing

Orange County Polished Concrete

This retail store’s beach and ocean theme was enhanced with a variegated concrete floor. Using a turquoise acid stain, Roy of The Kings Of Concrete floors was able to incorporate the aqua color of the store’s logo into the polished concrete resurfacing. Polished concrete resurfacing Finished concrete saves energy in several ways. In the summer time, a slab in contact with the ground draws the earth’s own natural cooling abilities into the building. In the winter, if a building has been designed to expose the slab to natural sunlight, it will soak up this radiant heat. Then at night the slab will release the heat into the building to provide a more uniformly warmer interior. Both of these are examples of concrete’s inherent thermal mass capability, which save money on heating and cooling costs of polished concrete resurfacing. New polished concrete floors

www.thekingsofconcrete.com

New Polished Concrete floor Resurfacing Slab

New floors require less work resulting in lower costs, but there are a few things to be aware of before a new polished concrete floor can be polished. Firstly the slab can contain a decorative aggregate. The two most common aggregates are river stone, granite, and black basalt mix, however the aggregate can be almost anything. The finished surface of the concrete will need to be finished to a high standard to facilitate the polishing process. During the finishing phase any decorative aggregates such as seashells or car parts can be dropped into the surface of the polished concrete. Builder needs to be aware as early as possible if the concrete is to be polished so that the final finish is of the best quality. Polished Concrete Retrofit floors Retrofit floors can be done in two ways. The existing floor slab can be cut or sanded and the natural aggregate will be the feature or a topping slab with a minimum thickness of 50 mm can be added on top of the existing slab.

Are Polished Concrete Floors Hard on the Feet?

  Yes, Polished concrete is a hard material and won’t cushion or “give” under bare feet.  

  • Polished Concrete hardness also contributes to its durability and abrasion resistance. In a commercial or warehouse setting, hard is good. You need a hard surface that can stand up to forklift traffic and heavy foot traffic.
  • For a residential floor, you can help cushion concrete with area rugs (which are easier to clean than wall-to-wall carpet).
  • While polished concrete may be hard, it’s not abrasive to the feet, especially if it’s polished or has a smooth finish.

The short answer is polished concrete is the best way to turn a floor that looks like it was poured for a garage into a floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like granite ! The short answer to Polished Concrete is that it’s the best way to turn a floor that looks like it was poured for a garage into a polished concrete floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like granite !dedication to detail, state of the art equipment, and pride taken in workmanship are why you need to call on Marble Shooters for your Concrete Polished needs. At Marble Shooters we work around your busy schedule, causing little or no down time. Experience, reliable, and efficiency add to making your decision to hire Marble Shooters the right decision. New concrete or existing, clear application or dyed our customers are amazed with the finish Marble Shooters is capable of producing Polished Concrete in Orange County.

The Kings Of Polished Concrete and Marble Shooters. We Are Best in Kingdom and County. PERHAPS THE WORLD!

Orange County polished concrete

We spend hours every day researching and applying the latest in lasting durable and beauitful concrete finishes. We have more than one opition for your floor. So we are confident that we can help you to make the correct choice. We will make the garage your warehouse or your living room the easiest surface to clean and perhaps the most beautiful! We are a family owned business and we share over 50 years of working knowledge. Your satisfaction means everything to us. We take pride in our workmanship and count on your referrals for more than 70% of our business. We are AA rated with the better bussiness bureau and licensed with the State Of California for polished concrete Polished Concrete is one of the most resilient types of construction material but undoubtedly; it is also vulnerable to destruction. In time, there will be damages on its surface that leaves very unwanted and unsafe conditions. As a natural resort, people will replace it with a new one. But wait, innovated machinery and highly improved technology allows us to do things that were not available and possible before. Now, we can repair and improve damages by simply resurfacing it. With this move, we can economize and have a practical solution that is of high-quality and excellent durability on your concrete floorAt present, establishments in Los Angeles and Orange County are resorting to many innovative methods to preserve their investments. They want every part of their facilities be made of the best materials and installed with meticulousness. Concrete Floorings are very important part of structures because they are constantly exposed to wear and tear. Nowadays, various types of floorings are found in the market and one of the highest in-demand for polished concrete . Here is the edited text. MARBLE SHOOTERS THE KINGS OF CONCRETE The truth of the matter is to make an informed decision you need two things; Knowledge and Choices. We can provide you both; with over twenty years of experience in concrete & stone we have seen it all and tried it all. From initial concrete design, to color and pattern cuts, together we will design the perfect floor for you. With options ranging from Polished, Stained, Dyed, and Coated Concrete we can provide the solution that is custom tailored to your specific needs. Please review our pictures by clicking on the icons below. If you would like a free estimate or if we can assist in answering any questions you might have please do not hesitate to call or email. It is our pleasure to serve you. Options Polished Concrete: We transform your existing concrete slab into a high shine, low maintenance work of art. Using the latest technological advancements such as: Diamond grinders, concrete consolidators, dyes, stains, and sealers, we can turn your concrete into a unique work of art. Offering the look and durability of stone without the extensive maintenance or high price tag. Concrete Coatings: When it comes to coatings, not all flooring is created equal. Many competitors or big-box stores use low grade coatings that are designed to keep costs down instead of perform or last. We use all industrial grade products that are designed to cover, seal, and enhance your existing concrete slab. Our 100% solids epoxy is the base of our chip system and is sealed with a two-part solvent based polyurethane top coat that is impervious to UV rays, oil, and even hot tires. Providing a superior floor covering that is guaranteed to last. Stain & Sealed Concrete: Staining and sealing is the most affordable way of transforming your existing concrete into a finished floor. Using an acrylic color, dye, or acid stain we can quickly convert your old dingy concrete slab to a beautiful piece of decorative concrete. You can even choose your finishes; from matte, satin, all the way to high gloss. Sealer choices include: Acrylic, Epoxy, Impregnator, or Polyurethane. Stain & Sealed Concrete is the must have option for all the bare concrete in your life. Design: Using saw cuts and multiple color schemes we can create a personalized work of art that will have people second guessing on what kind of surface they are looking at. Patterns and colors can be tailored to make everything from shapes to logos. Helping re-create the beauty and uniqueness of stone that will no doubt leave a lasting impression with everyone that views it.

www.thekingsofconcrete.com
Why Concrete Floors Are Pet-Friendly

Orange County polished concrete
Polished Concrete,

Your clients who have pets consider them to be important members of the family, and will often think about the needs of their four-footed companions when choosing the flooring materials they use in their home. This is a great selling point for concrete, since few flooring materials are friendlier to pets and their owners than concrete. Not only do concrete floors stand up well to claws and muddy paws, they can also contribute to pet comfort and health.

Sealed floor1) They resist pet stains and odors. When the pores in concrete are sealed with a protective film-forming sealer or floor finish, pet urine can’t seep into the floor and leave behind lingering odors and stains. 2) They are easy to clean. When family pets shed fur or race through the house with rain-soaked or muddy paws, cleaning up after them is no sweat if the floors are concrete. Tell homeowners that they can simply give the floor a few swipes with a broom, towel or mop, and the mess is history. See Caring for Concrete Floors.3) They won’t trap pet dander, fleas or mites. In addition to fur, pets shed animal dander that can aggravate allergies in people who are sensitive. Smooth floor surfaces like concrete won’t trap this dander the way carpet will, making the dander easy to remove during routine cleaning. Concrete floors also won’t harbor fleas or mites that pets may carry into the home. (For more information, watch the video Controlling Allergen)4) They are nontoxic. Synthetic carpets can emit volatile organic compounds, or VOCs, as can some carpet adhesives and padding. Some of the adhesives used under vinyl sheet goods and linoleum can also emit VOCs. Concrete floors, stained with nontoxic pigments, do not release VOCs that can be harmful to homeowners as well as their pets.Radiant heating cables5) You can heat them. Because hot air rises, many homes tend to be colder at floor level. And since that’s where pets spend most of their time, the ability to warm up concrete floors with radiant heating will keep them comfortable while saving the homeowner big money on energy bills.6) They are scratch resistant.Scratch-resistant floor Rambunctious pets and their claws can really scratch up hardwood flooring. Concrete floors are inherently scratch resistant, and when protected with a good sealer or floor wax, they are virtually scratchproof. View this chart comparing the performance of concrete sealer.
  • Polished Concrete Anaheim
  • Baldwin Park
  • Banning
  • Polished Concrete Shady canyon
  • Beverly Hills
  • Burbank
  • Cathedral City
  • Cathedral City
  • Corona
  • polished concrete Costa Mesa
  • Cypress California
  • Diamond Bar California
  • Downey California
  • Fullerton California
  • Garden Grove California
  • Glendale
  • Glendora California
  • Polished concrete West Hollywood California
  • Polished concrete Huntington Beach
  • Inglewood California
  • Polished concrete Irvine California
  • Polished concrete Laguna Hills Beach
  • Loma Linda
  • Polished Concrete Los Angeles
  • Mission Viejo California
  • Polished concrete Newport Beach
  • Norco California
  • Ontario
  • Palm Springs
  • Pasadena California
  • Rancho Cucamonga
  • Redlands
  • Riverside
  • San Dimas California
  • San Juan Capistrano
  • Santa Ana
  • Santa Clarita California
  • Santa Monica
  • Seal Beach California
  • Polished concrete West Covina California

More department stores, manufacturing companies, hotels, restaurants and even airports are using the Polished Concrete. This just proves that that more people sees the benefits and beauty of concrete polishing. It also goes to say that concrete polishing does not have to be confined in doors, it can also be used out doors. Dull gray cement floors are gradually changing into a work of art. As more people enjoy the beauty of concrete polishing, day by day there are new ways to enhance polished concrete. Just to site a few, you can stain it, add die to it, and arrange glass, nails or bolts to create a design. You can even have your polished concrete floor engraved.

Concrete Polishing – Getting Your
Orange County polished concrete
When people think of Polished Concrete, they often picture a drab, grey material used for the foundation of homes, unfinished basements and sidewalks; but consider the concrete floors that you see in large retail stores and in many industrial areas.These industrial strength floors are durable, decorative, and beautiful. With the help of your local contractor your dreams of having an attractive, very low maintenance flooring option is within your reach. When you choose concrete for your floors, driveway, garage or patio, you are limited only by your imagination. These floors can look as intricate as stone, as decorative as tile, and as creative as abstract art.
Homeowners everywhere are beginning to understand all of the advantages that concrete polishing has to offer. With the help of your local polished concrete contractor, you can take dull and drab concrete and turn it into a shiny and lustrous floor with a long life and durable surface. Your polished concrete contractor will use his or her tools and expertise to polish your concrete, making it less porous and more beautiful than you ever imagined. Now you don’t have to rip out and replace old flooring every few years – concrete polished concrete changes all that! Concrete Polishing for concrete floor is a process for turning a concrete floor into a highly abrasion resistant, incredibly dense, smooth and visually appealing surface on polished concrete

Polished concrete has long been known for its durability and cost-saving features. With modern technologies, homeowners and business owners are finding they can harness these advantages of concrete in their floor along with many other added benefits. Polished concrete is a popular alternative to other flooring materials because of three noteworthy benefits: lower total cost, lower maintenance, and aesthetics. Polished concrete’s superior durability and performance have made it a top finish for retail stores, warehouses, office facilities, and municipalities. Homeowners, as well, are selecting these smooth, high-luster floors that imitate the look of polished stone. Polished concrete floors are very economical. Unlike many other floor surface materials, a polished concrete floor can last up to ten years or longer before it needs to be refinished. Maintenance on a polished floor is also minimal, thereby reducing costs associated with keeping floors clean, durable, and traffic-friendly. Polished concrete floors are striking in appearance. The exposure of the aggregate in the concrete unveils a look of stone. There are a variety of colors available on the market to stain or in some other way modify the color and look of the polished concrete floor. There are also various levels of sheen depending on the degree of reflectivity and shine that is desired. Comparative Installation and Maintenance Costs for Polished Concrete Floors Based on a survey conducted by the National Terrazzo and Mosaic Association, the information below compares the cost per square foot of commonly used commercial flooring materials and polished concrete floors. This recent examination of flooring costs over a 20 year span illustrates not only some of the hidden costs involved in the purchase and installation of various materials, it also illustrates the dramatic difference in the cost of these materials. Costs per Square Installed Annual Years Replacement Total Exp. Cost PSF Foot Cost Maint. Av. Life Cost 20 Years /Year Vinyl Sheet Flooring $2.72 $1.39 9 $3.43 $38.14 $1.91 Vinyl Tile Flooring $1.23 $1.47 15 $1.60 $32.76 $1.64 Ceramic Mosaic Tile $6.48 $1.22 20 $30.88 $1.54 Quarry Tile $5.78 $0.58 20 $30.18 $1.51 Cement Terrazzo $8.50 $0.46 20 $20.10 $1.01 Granit-Glaze $6.50 $0.46 20 $15.70 $0.79 PolishedCrete $3.98* $0.00 20 $3.98 $0.19  1. Construction of a structure with a stained concrete floor is really no more difficult or demanding than the case of any other flooring as long as a few common sense rules are observed to preserve the natural beauty of the polished concrete. 2. Do not mark or discolor the floor with paint, siliconeoil, plumbers glue, purple primer, masking tape, gasoline, sheetrockmud, red or blue chalk, grease pencil, magic marker, ink pens, and anything else you would not get all over a hardwood floor.We do have techniques that can remove some of these blemishes, however, this will not yield perfect results, it is costly and should be avoided. 3. Driving nails into the floor for wall braces will result in big ugly holes when you remove the nails. Plan “A” do not drive nails into the floor, plan “B” if you drive a nail into the floor “DO NOT REMOVE IT!!!” We can remove them without making the big ugly holes. We suggest bracing the walls by nailing the foot of the brace to the baseplate of the opposite wall. 4. Never pour acid of any kind on the floor. Acid will neutralize the lime in the concrete making it inert and unstainable. 5. Avoid cutting plywood,siding, USB etc. on a 2×4 laying on the polished concrete. The blade can strike the concrete when the plywood flexes making ugly irregular scoremarks on the concrete. 6. Never put tape on the floor! Tape will pull up tiny particles from the concrete surface when it is removed. When these areas are stained they will be darker than the rest of the floorand shaped exactly like the piece of tape that was on the polised concrete. 7. Do not leave nails or other metal objects on wet polished concrete. The nails will rust and leave nail shaped dark red spots on the floor. Similar blemishes can occur if lumber is left lying on the concrete in wet conditions. 8. Orange chalk should be used to srike lines for laying out walls etc. The good thing about orange chalk is that water washes it away completely. Never use blue chalk as it cannot be removed and can easily be seen through most polished concrete stain colors. Red chslk is also permanent and should be avoided on polished concrete It used to be the only place you saw concrete floors without some kind of covering was in industrial settings, in the garage, or maybe an unfinished basement. People used to think that concrete floors looked cheap, like you couldn’t afford carpet or some other covering. Recently that has changed as more and more people are realizing that a polished concrete floor really looks great. Combine this with concrete etching and you can actually have a very artful look on your floors. One of the drivers behind polishing the floor instead of covering with carpet or tile is the current use of home heating systems embedded in the floor. These system pump hot water to all the ground floor rooms of the house and thus heat from the bottom up. This is the most efficient way of heating because heat rises so you don’t have to add extra energy to heat the air in order to get the floors toasty. Instead, the floor system heats up which increases the temperature in the first level rooms and then the warmth moves up through the house heating the remaining areas. If you are thinking about a polished concrete floor then your first choice will be whether or not you stain the floor. The polishing will work the same, but you can choose to either keep the traditional gray color or change it up with some other color you choose. Be aware though, if you stain the floor and then polish it you will have to remove the polishing and grind the concrete to get the stain back off if you change your mind later. So really think about whether you can stand to live with that blue or red floor for the next several years. Another option to think about is etching. This process involves removing the cement binder from the very top layer of the concrete which exposes the aggregate (rock) underneath. You can choose to do your entire floor this way or just etch the border or a design in the middle. Whichever way you choose to go, this will add a lot of character to the floor. Another use of concrete polishing is walls, counter tops, and even furniture. You may think that one or two walls in your living room with exposed concrete would look really cheap but in reality with the right accents it can look very chic. Polished Concrete counter tops are also becoming much more popular as people realize they are a lot cheaper than granite you can really add a nice touch in the kitchen with polished concrete. Acid stain works by penetrating the concrete surface and reacting chemically with the concrete. This makes it a permanent part of the concrete. The stain does not wear off the surface like a concrete sealer or a concrete paint does, eventually. All concrete floors accept stains differently. This creates natural color variations that are unique to each floor. Most acid stains mimic earth tones like tan, brown, terra cotta, blues, and green. They are also translucent, meaning the condition of the concrete they are applied to has to be taken into consideration before staining YOUR POLISHED CONCRETE Finding an epoxy coating that is compatible with a high pH can be a challenge—and if we were in a bar I would give you a couple of names—but the rules don’t let me tell you manufacturers names here. Suffice it to say, if they are foreign sounding and very expensive they will probably work. There are also some pretty impressive “domestic” technologies that involve treating concrete slabs with lithium penetrants that plug capillary pores and neutralize alkali’s that then get top-coated with epoxy coatings. What we have learned the hard way is that acid neutralizing does not work nor does using calcium silicate-based penetrants. The acids leave salt residues and the calcium silicates don’t completely react leaving behind the alkali’s we were worried about in the first place. On a positive note, calcium silicate-based penetrants do clog up the capillary pores—i.e. cause “arterial sclerosis” for concrete and do reduce vapor emissions—but they should be limited to concrete slabs that do not get covered with impermeable floor finishes. So they are pretty good for exposed concrete floors that will remain exposed polished concrete One of the most difficult (if not the most difficult) problems in the industry is edge work. Anyone who has done any concrete polishing will tell you that there is still no good solution for edges. Oftentimes, the edge work will end up being done by hand, and it is an art in itself to learn to blend the edges in with the rest of the floor. Many contractors won’t take jobs with relatively small amounts of square footage if there will be a great deal of edge work. You definitely want to take into consideration the amount of time you will spend doing edges in relation to the square footage of the job. Also, make sure the customer understands the nature of the beast with edges, their impact on price, and what to expect as far as aesthetics. Installing epoxy on the edges is often a great alternative to polishing them, but even with epoxy, you will still have to do some light grinding on the edges and prep them. Most existing concrete has been abused. Chips will not go away entirely unless you grind away a great deal of concrete at a great deal of expense. Concrete in poor condition will require more labor and will have more flaws. Concrete in poor condition will also be rough on your tools. These flaws won’t necessarily look bad. They are what I consider to be part of the natural element in concrete, like the natural elements in a slab of marble or granite. However, the customer needs to know exactly what to expect, and you can’t price these jobs too low. The waviness of the concrete will very much affect the ease of polishing and the outcome of your job. Wavy concrete floors are nothing rare. Some spots will be hard to reach, and your floor will require more work to be finished and will still not have an even look at the end. Unless you have a controlled pour, let the customer know that aggregate will vary a great deal throughout the floor. Expect to see large aggregate pieces in the joints and high spots and smaller aggregate in the rest of the floor. Make sure the customer understands this before you agree to do the job. The higher your high spots, and the more you need to grind them down, the larger the visible aggregate will be in those areas. Steer away from dealing with exposed aggregate on wavy floors. Laser-leveled concrete is much easier to polish. You can charge less for these floors. Most of the new concrete poured for industrial or commercial use now is laser-leveled. It is in renovation work that you are more likely to run into wavy floors. Some of the concrete floors poured now are also power-troweled to the point of being overtroweled for polished concrete. Some concrete is so overtroweled that it is almost burned, and it is either extremely difficult to polish or cannot be polished. Make sure you don’t make a commitment to polish a floor that cannot be polished. When VCT (vinyl composite tile) is taken up, it often leaves ghost lines. These lines may not go away. Your customer will need to be aware of this ahead of time. Soft concrete will cost you more to polish than hard concrete. You should perform a hardness test before pricing any job. Soft concrete will require hard metal-bond diamond tooling. That tooling will still wear out faster, so you’ll go through more of it — in some cases, a great deal more of it. This holds true for your metal-bond and your resin-bond diamond tooling, adding cost to your job. If your customer is requesting an exposed aggregate floor, make sure they understand the aggregate will not be evenly exposed. What already lies within the concrete, as it lies there, will be exposed. Also make sure you charge considerably more, as more labor and tooling will be required. If the concrete floor is uneven or wavy, this will become even more of an issue. If it were me, I’d have a customer sign off on such work. In today’s environment, it is wise to make sure that everyone is on the same page. You don’t want to end up in a lawsuit over unrealistic expectations. It’s always better to underpromise and overperform. Take into consideration dust on polished concrete as well as possible labor expenses for cleaning. Whether a vacuum system can make concrete grinding and polishing 99 percent dust-free is questionable. There will be dust, and quite a bit of it. In a setting such as an airport, retail store, or anywhere else where the public will encounter the dust, you must make sure you minimize this issue. You may have to clean at the end of every day. Understand that the last thing the end user needs is a lawsuit, not to mention the appearance of a very dusty environment. Also make sure your employees have dust masks available to them. Concrete dust can cause silicosis. These are all good things to keep in mind while you are pricing your first concrete polishing jobs. You will get better and better at it as you gain experience. Just as it is true that polished concrete OC is an art that has to be learned with experience, pricing a polished concrete

Concrete Polishing Los Angeles, Concrete Polishing Orange County, Garage Epoxy Concrete Floors

Concrete Polishing Los Angeles Concrete Floors Los Angeles.The Most Durable Concrete Polishing Los Angeles and Orange County Has To Offer. Look at Pic’s www.concretepolishinglosangeles.net of Beverly Hills, LA, Santa Fe Springs, Costa Mesa, Brea, Newport Beach, Irvine, Long Beach, Los Angeles.

www.concretepolishinglosangeles.net

Concrete floor polishing grinding leveling on industrial concrete flooring nothing wear’s better than polished concrete finishes. Stain or Dye can be preformed on all types of Polished concrete Los Angeles concrete old or new concrete, decorative concrete polishing in Los Angeles, Stained Concrete Polishing los Angeles concrete polishing and stain and seal on garage floors coatings both epoxy and urthane. Click on Concrete Polishing Los Angeles Photo Gallery above to see pictures Stained Dyed Polished or www.ConcretepolishingLosAngeles.net.

Many different looks can be achieved by concrete polishing Los Angeles  use of color staining and by cutting a design in the concrete, Concrete polishing los angeles where concrete polishing Los Angeles is like polished stained granite. Polishing concrete Los Angeles for home office or warehouse. Industrial concrete polishing Los Angeles, polishing warehouse floors in Los Angeles and on many car dealerships showrooms concrete polishing Los Angeles using staining for color. Picking the company with the most concrete polishing experience in Los Angeles is a must. Click on Concrete Polishing Los angeles Photo Gallery above to see pictures of our concrete polishing Los Angeles jobs.

Concrete polishing Los Angeles.

Concrete Polishing Los Angeles
Concrete polishing Los Angeles and Orange County

Concrete polishing Huntington Beach

Concrete Polishing Los Angeles – Getting Your Concrete Polished Los Angeles

www.ConcretePolishingLosAngeles.net
www.ConcretePolishingLosAngeles.net

When people think of Concrete Polishing Los Angeles and Orange County, www.concretepolishinglosangeles.net they often picture a drab, grey material used for the foundation of homes, unfinished basements and sidewalks; but consider the concrete floor that you see in large retail stores in Los Angeles Orange County and in many industrial areas.These industrial strength floors are durable, decorative, and beautiful. With the help of your local Concrete Polishing Los Angeles  contractor your dreams of having an attractive, very low maintenance flooring option is within your reach. When you choose concrete polishing Los Angeles for your floors, driveway, garage or patio, you are limited only by your imagination. These floors can look as intricate as stone, as decorative as tile, and as creative as abstract art. Concrete Polishing Los Angeles and in Orange County.

Concrete Polishing Los Angeles with acid staining

Homeowners Orange County are beginning to understand Concrete Polishing Los Angeles and all of the advantages that concrete polishing has to offer. With the help of your Los Angeles concrete polishing contractor, you can take dull and drab concrete and turn it into a shiny and lustrous floor with a long life and durable surface. Your concrete polishing Los Angeles contractor will use his or her tools and expertise to polish your concrete, making it less porous and more beautiful than you ever imagined. Now you don’t have to rip out and replace old flooring every few years – changes all that! Concrete Polishing Los Angeles.

Concrete Polishing Los Angeles – Polishing Concrete Floors In Orange County

Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Welcome to The Kings Of Concrete Polishing Los Angeles By the industries concrete polishing Los Angeles premier source for information on Concrete Polishing Los Angeles and also how to find a Concrete Polishing Los Angeles and Orange County. There are an overwhelming number of functional and decorative Concrete Polishing Los Angeles applications to help you with all your Los Angeles Residential, Los Angeles Commercial & Industrial concrete polishing Los Angeles needs such as polishing, grinding, acid staining, overlays, stamping, epoxy coatings, sealers, the list goes on and on. Here at ConcretePolishing Orange County. com we mainly focus on one thing; Concrete polishing Los Angeles and Orange County Flooring maintenance dollars you can save. They didn’t have this technology 15 years ago and our contractors listed in the Concrete polishing Los Angeles directory above (Find a Contractor ) are more than happy to come out and give you a free estimate, and an analysis of your concrete flooring project needs. Our Concrete Polishing Los Angeles Contractors also repair bad polishing jobs and staining projects gone awry, get your free estimate today. Concrete Polishing Los Angeles and Orange County.
Concrete polishing Los Angeles Flooring is the greatest flooring solution when considering the costs of keeping your floors clean, and the right contractor can make those dull gray floors look like a work of art. With benefits like long lasting durability, extremely low maintenance and increased reflectivity, Concrete Polishing Los Angelesis the right choice for any application. Polishing concrete and using densifiers will actually harden the surface of your concrete floor, making it denser and much more resistant to spills and stains; meaning there is no need for other over the counter concrete polishing in Los Angeles Polished concrete eliminates the need to continually replace your flooring. Don’t cover your concrete with other flooring materials, just to rip it out and replace it every few years, polish it and enjoy the many environmentally friendly aspects of your new polished concrete floor. On average, 10,000 SF of VCT can cost $5,000 in yearly stripping and waxing, this is why Concrete Polishing Los Angeles will give you the best bang for your flooring dollar, and it doesn’t cost anything for a free estimate and analysis of your concrete floor los angeles.
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County www.concretepolishinglosangeles.net
For many years carpet, vinyl, ceramic and hardwood flooring have been the most popular choices for homeowners. Now, with polished concrete polishingas an option, you will have a beautiful, easy to maintain floor that can match the decor in any room of your home or office. Some say this all concrete polishing and the incredibly durable and hard surface from polishing portland cement and marble chips for a flooring solution. Now you see these shiny concrete floors in large retail, grocery and commercial settings where low maintenance, durability and ease of cleaning are a priority. There are many options available from your local contractor for your concrete floors, and you’ll be amazed at how beautiful your concrete polishing floors become.
concrete polishing orange county

Concrete Polishing los Angeles

One of the most difficult (if not the most difficult) problems in the industry is edge work. Anyone who has done any concrete polishing will tell you that there is still no good solution for edges. Oftentimes, the edge work will end up being done by hand, and it is an art in itself to learn to blend the edges in with the rest of the floor. Many contractors won’t take jobs with relatively small amounts of square footage if there will be a great deal of edge work. You definitely want to take into consideration the amount of time you will spend doing edges in relation to the square footage of the job. Also, make sure the customer understands the nature of the beast with edges, their impact on price, and what to expect as far as aesthetics. Installing epoxy on the edges is often a great alternative to polishing them, but even with epoxy, you will still have to do some light grinding on the edges and prep them.Most existing concrete has been abused. Chips will not go away entirely unless you grind away a great deal of concrete polishing los angeles at a great deal of expense. Concrete in poor condition will require more labor and will have more flaws. Concrete polishing los angeles in poor condition will also be rough on your tools. These flaws won’t necessarily look bad. They are what I consider to be part of the natural element in concrete, like the natural elements in a slab of marble or granite. However, the customer needs to know exactly what to expect, and you can’t price these jobs too low.The waviness of the concrete will very much affect the ease of polishing and the outcome of your job. Wavy concrete polishing los angeles floors are nothing rare. Some spots will be hard to reach, and your floor will require more work to be finished and will still not have an even look at the end. Unless you have a controlled pour, let the customer know that aggregate will vary a great deal throughout the floor. Expect to see large aggregate pieces in the joints and high spots and smaller aggregate in the rest of the floor. Make sure the customer understands this before you agree to do the job. The higher your high spots, and the more you need to grind them down, the larger the visible aggregate will be in those areas. Steer away from dealing with exposed aggregate on wavy floors.Laser-leveled concrete is much easier to polish. You can charge less for these floors. Most of the new concrete poured for industrial or commercial use now is laser-leveled. It is in renovation work that you are more likely to run into wavy floors.Some of the concrete floors poured now are also power-troweled to the point of being overtroweled for polished concrete. Some concrete polishing los angeles is so overtroweled that it is almost burned, and it is either extremely difficult to polish or cannot be polished. Make sure you don’t make a commitment to polish a floor that cannot be polished.When VCT is taken up, it often leaves ghost lines. These lines may not go away. Your customer will need to be aware of this ahead of time.Soft concrete will cost you more to polish than hard concrete. You should perform a hardness test before pricing any job. Soft concrete will require hard metal-bond diamond tooling. That tooling will still wear out faster, so you’ll go through more of it — in some cases, a great deal more of it. This holds true for your metal-bond and your resin-bond diamond tooling, adding cost to your job.If your customer is requesting an exposed aggregate floor, make sure they understand the aggregate will not be evenly exposed. What already lies within the concrete polishing los angeles, as it lies there, will be exposed. Also make sure you charge considerably more, as more labor and tooling will be required. If the concrete floor is uneven or wavy, this will become even more of an issue. If it were me, I’d have a customer sign off on such work. In today’s environment, it is wise to make sure that everyone is on the same page. You don’t want to end up in a lawsuit over unrealistic expectations. It’s always better to underpromise and overperform.Take into consideration dust as well as possible labor expenses for cleaning. Whether a vacuum system can make concrete grinding and polishing 99 percent dust-free is questionable. There will be dust, and quite a bit of it. In a setting such as an airport, retail store, or anywhere else where the public will encounter the dust, you must make sure you minimize this issue. You may have to clean at the end of every day. Understand that the last thing the end user needs is a lawsuit, not to mention the appearance of a very dusty environment. Also make sure your employees have dust masks available to them. Concrete dust can cause silicosis.These are all good things to keep in mind while you are pricing your first concrete polishing jobs. You will get better and better at it as you gain experience. Just as it is true that concrete polishing is an art that has to be learned with experience, pricing a polished concrete job is also an art that is learned with experience. concrete polishing los angeles

Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete in its “natural” state is a porous product that is susceptible to efflorescence, spalling and dusting; and it does not provide an aesthetic finish, nor is it easily cleaned. That’s why Advanced Floor Products has created a concrete polishing Los Angeles is a science and art that revolves around the conversion of from being a plain, boring, and porous Concrete Polishing los Angeles industrial floor, to being one of strength, longevity and beauty. Rather than continually having to cover up the floor and trying to hide the inherent problems, only to create new ones, our skilled Certified Applicators create a floor that meets your long-term needs. Concrete Polishing los Angeles through the use of our patented process of diamond grinding and polishing, in conjunction with the specially formulated RetroPlate concrete polishing Los Angeles, we eliminate your need for all topical sealers. We eliminate moisture vapor problems. Bottom line: Look at the true costs of the product that concrete polishing you choose…and RetroPlate will generally be your cost effective choice.

Concrete Staining  Concrete Polishing  Concrete Resurfacing

Concrete Polishing los Angeles
If you recently ripped out carpet, tile, or linoleum, or your pool deck and driveway are all cracked up, there is a remedy. Concrete polishing, and concrete overlays make your existing concrete beautiful again.

Concrete Staining

For a mottled, variegated look, concrete staining is the way to go. We have a wide pallete of colors to match any architectural style. Choose either glossy or satin finish. Concrete staining, interior or exterior, is an easy way to add value to your property.

Concrete Polishing

Los Angeles
Concrete polishing Los Angeles means grinding your concrete floors with finer and finer grit diamonds. Concrete polishing Los Angeles leaves a smooth, glossy interior floor that lasts for years. Polished concrete can also be stained. Polished concrete is for interiors, only.

Concrete Resurfacing

Concrete polishing resurfacing is a way to turn your messed up slab into a fresh canvas. We apply a thin concrete microtopping that can be changed to the natural look of flagstone, slate, or marble without the expensive mess. We can also create a sleek, ultra modern look. Every slab becomes a unique, one-of-a-kind bit of art that reflects the personality of its owner.

Concrete Finishing

Whether you want glossy, haute-couture floors or a natural, satin finish, The Kings Of  Concrete Polishing and Resurfacing can create it for you. All without expensive tear-out and demolition.

Some benefits of concrete resurfacing:

1. About half the cost of tear-out and pouring new
2. Hypoallergenic Concrete Polishing Los Angeles
3. Eco-friendly Concrete Polishing Los Angeles, with less natural resources used in production
4. Completely customizable Concrete Polishing Los Angeles
5. Concrete Polishing Los Angeles,Easy to clean

Concrete Polishing Los Angeles

As an engineer, I visualize a commercial floor as a thick concrete slab with lots of reinforcement. I’m thinking of the loads that the slab will need to resist, not the abrasion that it will see on the surface: but concrete in commercial and industrial applications must support heavy loads and resist surface wear.
Some say the surface of Concrete Polishing Los Angeles is weak and needs to be coated with a more durable finish. Others say that the strength of the concrete is below the surface. According to some, concrete polishing is becoming the universal choice for commercial flooring. I’m going to take a look at the benefits and drawbacks of this process.
Concrete polishing, or “slab restoration” (as Kerry Pauley, president of The Irony Pony, Ltd., refers to it as), is being used throughout the country. Here is why: commercial concrete is often protected from wear and dusting with topical sealers and coatings. These sealers and coatings can range in cost from 50 cents per s.f. for topical sealers, to $10 per s.f. for epoxy and urethane- based coatings. Concrete polishing prices will range from $3-7 per s.f. for a 3,000 grit finish based on size of the project and the number of obstacles. “A 3,000 grit finish includes the use of an impregnating sealer that reacts with the concrete polishing los angeles and fills the surface voids,” says Pauley.
The installation costs for polished concrete is half to one third the cost of coatings, but that’s not where the savings really lie. “Polishing concrete improves the overall quality of the floor,” says Poinsettia Byrd with VIC International. The long-term maintenance costs can be astronomical for a commercial floor. Businesses such as manufactures, department stores, restaurants, and car dealers use polishing because coatings and sealers can have issues such as delaminating, staining and wear through. The life of some of these finishes can often be measured in months, resulting in constant up-keep. Concrete Polishing los angeles concrete produces an extremely dense, abrasion resistant surface that will not delaminate.
The polished surface may lose some of its shine over time in areas of heavy forklift and foot traffic. The shine can be brought back with minimal aggravation and cost. The only maintenance a polished floor will need is the removal of abrasives such as sand. Depending on the use of the floor, cleaning with a light detergent may also be needed. The service life of polished concrete cannot be determined as of yet since it is a fairly new process. But some existing polished concrete jobs that see heavy forklift traffic are over 5 years old and performing well with minimal maintenance.
Cleaning concrete is easy and is an important step towards prolonging the life of your beautiful floors, countertops, patios, or other polished concrete. Here are some tips for cleaning your concrete to keep it
looking beautiful. Regular maintenance and concrete cleaning are necessary to keep your concrete looking as fresh and beautiful as the day it was finished. Over time, dirt that is not removed from the surface of the concrete will make its way further into the concrete and could cause significant damage. Don’t waste thousands of dollars refinishing your concrete if you don’t have to. Your local contractor can introduce you to many affordable methods of cleaning your concrete and restoring it to its original beauty and luster
Indoor concrete (light cleaning)
When beverages and other liquids are spilled on concrete, they may leave noticeable spots. Usually soap and water will be enough to clean cola, coffee, and other beverages out of your concrete. For tougher spots, your contractor can help. Cleaning tough spots without ruining the paint, epoxy and stamping on your floor is a delicate project that requires special cleaners and tools; cleaners that are tough enough to get out the stain, yet gentle enough to keep your decorative floor intact.
If your concrete has become dirty with mold and mildew, identified by patchy black spots, don’t lose hope, this too can be cleaned with the help of your contractor. Mold and mildew can spread throughout your home quickly and mold spores can cause many illnesses including asthma and irritable bowel syndrome. If you suspect that you have mold or mildew on your concrete, be sure to contact a contractor immediately before your family’s health is impacted. Since mold and mildew are caused by moisture, your contractor may also check the surrounding area for any leaks that could be causing the excess moisture.
Outdoor concrete (heavy cleaning)
When dirt, dust, and grime collect on your outdoor concrete surface, it may begin to look black or brown in appearance. Whether you’ve got tobacco stains, charcoal, soil or other outdoor debris on your concrete, your contractor knows how to get it out without leaving any indication that it ever existed. Sometimes, black or brown spots on your concrete can be oily—especially on concrete used in a garage or as a driveway. Because oil and grease are so difficult to remove from concrete, harsh and toxic chemicals are used. Calling in a contractor is imperative since the harsh chemicals may damage your concrete or your health if not handled properly.

For many difficult stains and dirt spots, steam cleaning and water blasting are safe, non-toxic and effective cleaning methods. The equipment used for steam cleaning and power cleaning can be unwieldy and expensive. Additionally, too much concentrated focus with a power washer on your finished concrete could damage the paint or stamping on the surface. Your contractor has all the appropriate equipmentfor concrete polishing los angeles malibu and experience to clean these stains without damaging your concrete.
Other benefits that commercial and industrial property owners see in concrete polishing los angeles are reflectance, slip resistance, low VOC’s
Costa Mesa Green Home Tour

Concrete Flooring environmentally-friendly to the max at home.

Updated: Friday, 02 Jul 2010, 8:46 PM PDT
Published : Friday, 02 Jul 2010, 8

By myFOXla.com Web Staff

Costa Mesa – There’s a new home in Costa Mesa that ensures the owner will go green in just about every way possible… and do it in style.
The six-bedroom, 4,900 square foot home takes the prize as Orange County’s highest rated home by the U.S. Green Building Council’s Leadership in Energy and Environmental Design for homes program.
The entire house is built with conservation of the environment in mind.
From the home orientation to capture solar heating… polished concrete flooring by marble shooters to filters that pump shower and bath water back into irrigation and toilets for water recycling… to the installation of non-invasive landscape and photovoltaic cells that provide 90-percent of the energy needed to run the home.
How much? The asking price… just under $2.6 million.
At Marble Shooters we were glad to be a part of this polished concrete flooring project in orange county and concrete polishing Los Angeles
Want to know more about it? You can take a quick tour in the video or check out costa mesa green house . com for a really detailed look at the concrete flooring, Concrete polishing los angeles can be green also. Concrete polishing los angeles is expanding and developing many new techniques and products for the Concrete Polishing Los Angeles and Orange County Industry. The industry is in a crucial point as there are many contractors that do subpar work and call it “Concrete Polishing Los Angeles and Orange County.” Thus a need for an independent Orange County technical institute that “IT IS THE INTENT OF THE INSTITUTE to establish standards through accreditation, and to provide quality education and support for Architects, Engineers, General Contractors, Property Owners, Interior Designers, and Concrete Polishing los Angeles contractors /concrete Polishing Los Angeles.
The Concrete Polishing Los Angeles Association of America is also in Orange County at concrete polishing Los Angeles. net:
  1. ✓Defined the processing process and its complexities.
  1. ✓Defined the functional and aesthetic advantages and disadvantages of ground, honed and concrete polishing Los Angeles.
  1. ✓Defined the flooring options available when processing concrete polishing Los Angeles to a desired finish.
  1. ✓Brought true craftsmanship and professionalism to the concrete processing industry through contractor evaluations, accreditations and training.
  1. ✓Developed written specifications that provide the desired results for the customer to include the concrete mix design, placement, finishing, joint layout, the ground, honed or polished finish to protection.
  1. ✓Provided tools for contractors to further develop their business in sales, marketing, estimating, business operations and development, including meeting the American Institute of Architects (AIA) Continuing Education System (CES) credit requirements.Concrete Polishing Los Angeles
The Concrete polishing Los Angeles and Orange County Association of America has also:
  1. ✓Defined the processing process and its complexities.
  1. ✓Defined the functional and aesthetic advantages and disadvantages of ground, honed and polished concrete.
  1. ✓Defined the flooring options available when processing concrete to a desired finish.
  1. ✓Brought true craftsmanship and professionalism to the concrete processing industry through contractor evaluations, accreditations and training.
  1. ✓Developed written specifications that provide the desired results for the customer to include the concrete mix design, placement, finishing, joint layout, the ground, honed or polished finish to protection.Concrete Polishing Los Angeles
  2. ✓Provided tools for contractors to further develop their business in sales, marketing, estimating, business operations and development, including meeting the American Institute of Architects (AIA) Continuing Education System (CES) credit requirements. Concrete Polishing Los Angeles

concrete polishing Los AngelesStained Concrete Polishing Los Angeles

This retail store’s beach and ocean theme was enhanced with a variegated concrete floor. Using a turquoise acid stain, Mat of concrete polishing Los Angeles incorporate the aqua color of the store’s logo into the concrete polishing Los Angeles.
Finished concrete saves energy in several ways. In the summer time, a slab in contact with the ground draws the earth’s own natural cooling abilities into the building. In the winter, if a building has been designed to expose the slab to natural sunlight, it will soak up this radiant heat. Then at night the slab will release the heat into the building to provide a more uniformly warmer interior. Both of these are examples of concrete’s inherent thermal mass capability, which save money on heating and cooling costs for concrete polishing los angeles
Concrete polishing Los Angeles saves energy in several ways. In the summer time, a slab in contact with the Concrete Polishing Los Angeles ground draws the earth’s own natural cooling abilities into the building. In the winter, if a building has been designed to expose the slab to natural sunlight, it will soak up this radiant heat. Then at night the slab will release the heat into the building to provide a more uniformly warmer interior. Concrete Polishing Los Angeles Both of these are examples of concrete’s inherent thermal mass capability, which save money on heating and cooling costs.Concrete Polishing Los Angeles is concrete that has been treated with a chemical densifier and ground with progressively finer grinding tools. The grinding tools for Concrete Polishing Los Angeles are usually progressive grits of diamond grinding cup wheels and diamond polishing pads. Typically, concrete is not considered polished before 400 grit, and it is normally finished to either the 800, 1500, or 3000 grit level. Stains and dyes are often applied to enhance polished concrete as well as other options Concrete Polishing Los Angeles such as scoring, creating radial lines, grids, bands, borders, and other concrete polishing Los Angeles designs
New floor Concrete Polishing Los Angeles
New Polished Concrete Los Angeles
New floors require less work resulting in lower costs, but there are a few things to be aware of before a new can be polished Concrete Polishing Los Angeles. Firstly the slab can contain a decorative aggregate. The two most common aggregates are river stone, granite, and black basalt mix, however the aggregate can be almost anything. The finished surface of the Concrete Polishing Los Angeles will need to be finished to a high standard to facilitate the polishing process. During the finishing phase any decorative aggregates such as seashells or car parts can be dropped into the surface of the concrete. Builder needs to be aware as early as possible if the concrete is to be polished so that the final finish is of the best quality.
Retroplate floors Concrete polishing Los Angeles and Orange County
Retrofit floors can be done in two ways. The existing floor slab can be cut or sanded and the natural aggregate will be the feature or a topping slab with a minimum thickness of 50 mm can be added on top of the existing slab. Concrete Polishing Los Angeles
Concrete Polishing Los Angeles

Concrete Polishing Los Angeles are a reflection of your style and taste – the initial impression created when a person enters your Concrete Polishing Los Angeles home or business – truly a lasting impression. Do your concrete floors reflect the right impression?
Concrete polishing Los Angeles
Decorative and Concrete Polishing Los Angeles is becoming more popular everyday!
The short answer is that it’s the best way to turn a floor that looks like it was poured for a garage into a floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like marble! The answer is concrete polishing los angeles
The short answer to concrete polishing is that it’s the best way to turn a floor that looks like it was poured for a garage into a concrete polishing floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like marble!dedication to detail, state of the art equipment, and pride taken in workmanship are why you need to call on Marble Shooters for your Concrete Polished needs. At Marble Shooters we work around your busy schedule, causing little or no down time. Experience, reliable, and efficiency add to making your decision to hire Marble Shooters the right decision. New concrete or existing, clear application or dyed our customers are amazed with the finish Marble Shooters is capable of Concrete Polishing Los Angeles

The King’s Of Concrete . com and Marble Shooters. We Are Best in Kingdom and County. PERHAPS THE WORLD!

We spend hours every day researching and applying the latest in lasting durable and beauitful concrete finishes. We have more than one opition for your floor. So we are confident that we can help you to make the correct choice. We will make the garage your warehouse or your living room the easiest surface to clean and perhaps the most beautiful! We are a family owned business and we share over 50 years of working knowledge. Your satisfaction means everything to us. We take pride in our workmanship and count on your referrals for more than 70% of our business. We are AA rated with the better bussiness bureau and licensed with the State Of California number in concrete polishing Los Angeles
Concrete floor poliahing or coatings are one of the most resilient types of construction material but undoubtedly; it is also vulnerable to destruction. In time, there will be damages on its surface that leaves very unwanted and unsafe conditions. As a natural resort, people will replace it with a new one. But wait, innovated machinery and highly improved technology allows us to do things that were not available and possible before. Now, we can repair and improve damages by simply resurfacing it. With this move, we can economize and have a practical solution that is of high-quality and excellent durability on your Concrete polishing Los Angeles and Orange County.
At present, establishments in Los Angeles and Orange County are resorting to many innovative methods to preserve their investments. They want every part of their facilities be made of the best materials and installed with meticulousness. Concrete polishing los angeles flooring is very important part of structures because they are constantly exposed to wear and tear. Nowadays, various types of floorings are found in the market and one of the highest in-demand is concrete polishing Los Angeles
Here is the edited text.
MARBLE SHOOTERS
THE KINGS OF CONCRETE
The truth of the matter is to make an informed decision you need two things;
Knowledge and Choices. We can provide you both; with over twenty years of
experience in concrete & stone we have seen it all and tried it all. From
initial concrete design, to color and pattern cuts, together we will design the
perfect floor for you.
With options ranging from Polished, Stained, Dyed, and Coated Concrete we can
provide the solution that is custom tailored to your specific needs.
Please review our pictures by clicking on the icons below. If you would like a free estimate or if we can assist in answering any questions you might have
please do not hesitate to call or email. It is our pleasure to serve you.
Options
Polished Concrete:
We transform your existing concrete slab into a high shine, low maintenance work
of art. Using the latest technological advancements such as: Diamond grinders,
concrete consolidators, dyes, stains, and sealers, we can turn your concrete polishing Los Angeles
into a unique work of art. Offering the look and durability of stone without the
extensive maintenance or high price tag.
Concrete Coatings:
When it comes to coatings, not all flooring is created equal. Many competitors
or big-box stores use low grade coatings that are designed to keep costs down instead of perform or last. We use all industrial grade products that are designed to cover, seal, and enhance your existing concrete slab. Our 100% solids epoxy is the base of our chip system and is sealed with a two-part solvent based polyurethane top coat that is impervious to UV rays, oil, and even  hot tires. Providing a superior floor covering that is guaranteed to last.  Stain & Sealed Concrete polishing los angeles:
Staining and sealing is the most affordable way of transforming your existing concrete polishing Los Angeles into a finished floor. Using an acrylic color, dye, or acid stain we
can quickly convert your old dingy concrete slab to a beautiful piece of
decorative concrete polishing Los Angeles. You can even choose your finishes; from matte, satin, all
the way to high gloss. Sealer choices include: Acrylic, Epoxy, Impregnator, or
Polyurethane. Stain & Sealed Concrete is the must have option for all the bare
concrete polishing los angeles in your life.
Design: Concrete polishing Los Angeles
Using saw cuts and multiple color schemes we can create a personalized work of
art that will have people second guessing on what kind of surface they are
looking at. Patterns and colors can be tailored to make everything from shapes
to logos. Helping re-create the beauty and uniqueness of stone that will no doubt leave a lasting impression with everyone that views it. Concrete Polishing Los Angeles
If the existing concrete polishing Los Angeles surface needs to be solidified and densified before concrete polishing, the contractor might apply penetrating hardeners to the concrete polishing. This usually happens after first stage of the grinding process. The hardeners can be used on both existing or and react chemically with the concrete polishing los angeles to result in a hard crystalline structure. In addition, the hardeners offer extra protection from staining and water penetration and also prevent the concrete dusting after concrete polishing los Angeles
Why Concrete Floors Are Pet-Friendly
Your clients who have pets consider them to be important members of the family, and will often think about the needs of their four-footed companions when choosing the flooring materials they use in their home. This is a great selling point for concrete, since few flooring materials are friendlier to pets and their owners than concrete. Not only do concrete floors stand up well to claws and muddy paws, they can also contribute to pet comfort and health.
1) They resist pet stains and odors.
When the pores in concrete are sealed with a protective film-forming sealer or floor finish, pet urine can’t seep into the floor and leave behind lingering odors and stains.
2) They are easy to clean.
When family pets shed fur or race through the house with rain-soaked or muddy paws, cleaning up after them is no sweat if the floors are concrete. Tell homeowners that they can simply give the floor a few swipes with a broom, towel or mop, and the mess is history. See Caring for Concrete Floors.3) They won’t trap pet dander, fleas or mites.
In addition to fur, pets shed animal dander that can aggravate allergies in people who are sensitive. Smooth floor surfaces like concrete won’t trap this dander the way carpet will, making the dander easy to remove during routine cleaning. Concrete polishing Los Angeles floors also won’t harbor fleas or mites that pets may carry into the home. (For more information, watch the video Controlling Allergen)4) They are nontoxic.
Synthetic carpets can emit volatile organic compounds, or
VOCs, as can some carpet adhesives and padding. Some of
the adhesives used under vinyl sheet goods and linoleum can
also emit VOCs. Concrete polishing los angeles floors, stained with nontoxic
pigments, do not release VOCs that can be harmful to homeowners as well as their pets.5) You can heat them.
Because hot air rises, many homes tend to be colder at floor level. And since that’s where pets spend most of their time, the ability to warm up concrete floors with radiant heating will keep them comfortable while saving the homeowner big money on energy bills.6) They are scratch resistant.
Rambunctious pets and their claws can really scratch up hardwood flooring. Concrete polishing los angeles floors are inherently scratch resistant, and when protected with a good sealer or floor wax, they are virtually scratchproof. View this chart comparing the performance of concrete Polishing los angeles sealers.

Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Concrete Polishing Los Angeles
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County

Concrete Polishing Los Angeles – Getting Your Concrete Polishing

Comparative Installation and Maintenance Costs for Polished Concrete FloorsBased on a survey conducted by the National Terrazzo and Mosaic Association, the information
below compares the cost per square foot of commonly used commercial flooring materials and polished concrete floors. This recent examination of flooring costs over a 20 year span illustrates not only some of the hidden costs involved in the purchase and installation of various materials, it also illustrates the dramatic difference in the cost of these materials.
Costs per Square Installed Annual Years Replacement Total Exp. Cost PSF
Foot Cost Maint. Av. Life Cost 20 Years /Year
Vinyl Sheet Flooring $2.72 $1.39 9 $3.43 $38.14 $1.91
Vinyl Tile Flooring $1.23 $1.47 15 $1.60 $32.76 $1.64
Ceramic Mosaic Tile $6.48 $1.22 20 $30.88 $1.54
Quarry Tile $5.78 $0.58 20 $30.18 $1.51
Cement Terrazzo $8.50 $0.46 20 $20.10 $1.01
Granit-Glaze $6.50 $0.46 20 $15.70 $0.79
PolishedCrete $3.98* $0.00 20 $3.98 $0.19
When people think of Concrete Polishing, they often picture a drab, grey material used for the foundation of homes, unfinished basements and sidewalks; but consider the concrete floors that you see in large retail stores and in many industrial areas.These industrial strength floors are durable, decorative, and beautiful. With the help of your local contractor your dreams of having an attractive, very low maintenance flooring option is within your reach. When you choose concrete for your floors, driveway, garage or patio, you are limited only by your imagination. These floors can look as intricate as stone, as decorative as tile, and as creative as abstract art.
Homeowners everywhere are beginning to understand all of the advantages that ( concrete polishing Los Angeles. net )has to offer. With the help of your local Concrete polishing Los Angeles and Orange County contractor, you can take dull and drab concrete and turn it into a shiny and lustrous floor with a long life and durable surface. Your concrete polishing contractor will use his or her tools and expertise in concrete polishing Los Angeles your concrete, making it less porous and more beautiful than you ever imagined. Now you don’t have to rip out and replace old flooring every few years – concrete polishing changes all that!
Concrete Polishing Los Angeles for concrete floors is a process for turning a concrete floor into a highly abrasion resistant, incredibly dense, smooth and visually appealing surface.
Concrete polishing Los Angeles
Concrete Floors
Concrete polishing Los Angeles and Orange County has long been known for its durability and cost-saving features. With modern technologies, homeowners and business owners are finding they can harness these advantages of concrete in their floor along with many other added benefits. Concrete Polishing Los Angeles is a popular alternative to other flooring materials because of three noteworthy benefits: lower total cost, lower maintenance, and aesthetics Concrete Polishing Los Angeles superior durability and performance have made it a top finish for retail stores, warehouses, office facilities, and municipalities. Homeowners, as well, are selecting these smooth, high-luster floors that imitate the look of polished stone. Concrete Polishing Los Angeles floors are very economical. Unlike many other floor surface materials, Concrete Polishing Los Angeles floor can last up to ten years or longer before it needs to be refinished. Maintenance on a Concrete Polishing Los Angeles is also minimal, thereby reducing costs associated with keeping floors clean, durable, and traffic-friendly.Concrete Polishing Los Angeles floors are striking in appearance. The exposure of the aggregate in the Concrete Polishing Los Angeles unveils a look of stone. There are a variety of colors available on the market to stain or in some other way modify the color and look of Concrete Polishing Los Angeles. There are also various levels of sheen depending on the degree of reflectivity and shine that is desired.Concrete Polishing Los Angeles and Orange County
Concrete Polishing Los Angeles
Concrete Polishing Los Angeles. net
1. Construction of a structure with a stained Concrete polishing Los Angeles and Orange County is really no more difficult or demanding than the case of any other flooring as long as a few common sense rules are observed to preserve the natural beauty of the concrete.
2. Do not mark or discolor the floor with paint, siliconeoil, plumbers glue, purple primer, masking tape, gasoline, sheetrockmud, red or blue chalk, grease pencil, magic marker, ink pens, and anything else you would not get all over a hardwood floor.We do have techniques that can remove some of these blemishes, however, this will not yield perfect results, it is costly and should be avoided.
3. Driving nails into the floor for wall braces will result in big ugly holes when you remove the nails. Plan “A” do not drive nails into the floor, plan “B” if you drive a nail into the floor “DO NOT REMOVE IT!!!” We can remove them without making the big ugly holes. We suggest bracing the walls by nailing the foot of the brace to the baseplate of the opposite wall.
4. Never pour acid of any kind on the floor. Acid will neutralize the lime in the concrete making it inert and unstainable.
5. Avoid cutting plywood,siding, USB etc. on a 2×4 laying on the concrete polishing surface. The blade can strike the concrete when the plywood flexes making ugly irregular scoremarks on the concrete polishing surface.
6. Never put tape on the floor! Tape will pull up tiny particles from the concrete surface when it is removed. When these areas are stained they will be darker than the rest of the floorand shaped exactly like the piece of tape that was on the concrete polishing Los Angeles surface.
7. Do not leave nails or other metal objects on wet concrete. The nails will rust and leave nail shaped dark red spots on the floor. Similar blemishes can occur if lumber is left lying on the concrete polishing Los Angeles in wet conditions.
8. Orange chalk should be used to srike lines for laying out walls etc. The good thing about orange chalk is that water washes it away completely. Never use blue chalk as it cannot be removed and can easily be seen through most concrete Polishing stain colors. Red chalk is also permanent and should be avoided. On Concrete Polishing Los Angeles
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing Los Angeles and Orange County
Concrete polishing in Los Angeles and Orange Countywhen it’s done, can add a level of elegance and beauty to your environment living from home or Office. You want to make sure that the company that you decide to go with you help with your project has the knowledge, expertise and the right set of concrete polishing tools to achieve the effects you want. Here are a few tips and ideas to make sure that you will find the concrete polishing contractor to help you with your concrete polishing Los Angeles.
Acid stain works by penetrating the concrete surface and reacting chemically with the concrete. This makes it a permanent part of the concrete. The stain does not wear off the surface like a concrete sealer or a concrete paint does, eventually.
All concrete polishing Los Angeles floors accept stains differently. This creates natural color variations that are unique to each floor.
Most acid stains mimic earth tones like tan, brown, terra cotta, blues, and green. They are also translucent, meaning the condition of the concrete they are applied to has to be taken into consideration before concrete polishing Los Angeles
One of the most difficult (if not the most difficult) problems in the industry is edge work. Anyone who has done any concrete polishing will tell you that there is still no good solution for edges. Oftentimes, the edge work will end up being done by hand, and it is an art in itself to learn to blend the edges in with the rest of the floor. Many contractors won’t take jobs with relatively small amounts of square footage if there will be a great deal of edge work. You definitely want to take to concrete polishing Los Angeles about the amount of time you will spend doing edges in relation to the square footage of the job. Also, make sure the customer understands the nature of the beast with edges, their impact on price, and what to expect as far as aesthetics. Installing epoxy on the edges is often a great alternative to polishing them, but even with epoxy, you will still have to do some light grinding on the edges and prep them.
Most existing concrete has been abused. Chips will not go away entirely unless you grind away a great deal of concrete at a great deal of expense. Concrete in poor condition will require more labor and will have more flaws. Concrete in poor condition will also be rough on your tools. These flaws won’t necessarily look bad. They are what I consider to be part of the natural element in concrete, like the natural elements in a slab of marble or granite. However, the customer needs to know exactly what to expect, and you can’t price these jobs too low.
The waviness of the concrete will very much affect the ease of polishing and the outcome of your job. Wavy concrete floors are nothing rare. Some spots will be hard to reach, and your floor will require more work to be finished and will still not have an even look at the end. Unless you have a controlled pour, let the customer know that aggregate will vary a great deal throughout the floor. Expect to see large aggregate pieces in the joints and high spots and smaller aggregate in the rest of the floor. Make sure the customer understands this before you agree to do the job. The higher your high spots, and the more you need to grind them down, the larger the visible aggregate will be in those areas. Steer away from dealing with exposed aggregate on wavy floors.
Laser-leveled concrete is much easier to polish. You can charge less for these floors. Most of the new concrete poured for industrial or commercial use now is laser-leveled. It is in renovation work that you are more likely to run into wavy floors.
Some of the concrete floors poured now are also power-troweled to the point of being overtroweled for polished concrete. Some concrete is so overtroweled that it is almost burned, and it is either extremely difficult to polish or cannot be polished. Make sure you don’t make a commitment to polish a floor that cannot be polished.
When VCT (vinyl composite tile) is taken up, it often leaves ghost lines. These lines may not go away. Your customer will need to be aware of this ahead of time.
Soft concrete will cost you more to polish than hard concrete. You should perform a hardness test before pricing any job. Soft concrete polishing Los Angeles will require hard metal-bond diamond tooling. That tooling will still wear out faster, so you’ll go through more of it — in some cases, a great deal more of it. This holds true for your metal-bond and your resin-bond diamond tooling, adding cost to your job.
If your customer is requesting concrete polishing Los Angeles exposed aggregate floor, make sure they understand the aggregate will not be evenly exposed. What already lies within the concrete, as it lies there, will be exposed. Also make sure you charge considerably more, as more labor and tooling will be required. If the concrete floor is uneven or wavy, this will become even more of an issue. If it were me, I’d have a customer sign off on such work. In today’s environment, it is wise to make sure that everyone is on the same page. You don’t want to end up in a lawsuit over unrealistic expectations. It’s always better to underpromise and overperform.
Take into consideration dust as well as possible labor expenses for cleaning. Whether a vacuum system can make concrete grinding and polishing 99 percent dust-free is questionable. There will be dust, and quite a bit of it. In a setting such as an airport, retail store, or anywhere else where the public will encounter the dust, you must make sure you minimize this issue. You may have to clean at the end of every day. Understand that the last thing the end user needs is a lawsuit, not to mention the appearance of a very dusty environment. Also make sure your employees have dust masks available to them. Concrete dust can cause silicosis.
These are all good things to keep in mind while you are pricing your first concrete polishing jobs. You will get better and better at it as you gain experience. Just as it is true that concrete polishing is an art that has to be learned with experience, pricing for concrete polishing Los Angeles

Epoxy Garage Floor Coatings Concrete Epoxy Coatings with Industrial Grade epoxy

Concrete Coating Orange County

Concrete Sealer 949 3875770

– January 19, 2015 – Marble Shooters Irvine has announced a concrete sealer efflorescence and antique release remover. This product is biodegradable and removes cement scale and antique release which may be applied with a brush or sprayer.

“We keep receiving calls for a concrete coating cleaner,” said Brian , Director of Operations of Concrete sealer, “that removes efflorescence and antique release.” Concrete Coating’ proceeded to develop the cleaner due to increased interest in such a product which allows for removal of efflorescence.

Epoxy garage floor coating  product line, with products that meet their strict standards for quality, in order to allow their distributors and contractors to stay competitive in the decorative concrete coating market. Concrete coating efflorescence and antique release remover is the latest product to meet those standards and is available in a 1-gallon jugs.

 

Concrete Coating

Turn Your Epoxy Garage Floor Coating into a Showroom concrete coating!

Epoxy Garage Floor Coating
Concrete Coating adds a showroom shine to your floor with concrete coating. We specialize in industrial decorative quartz epoxy coatings that are heavily-textured, durable, slip-resistant and a breeze to clean!

Concrete Sealer

DECORATIVE CONCRETE COATING INFORMATION & SERVICES
The Decorative Concrete Coating Forums is dedicated to the development and promotion of Decorative Concrete Coating. We aim to help Decorative Concrete Coating Contractors, Architects, General Contractors and Designers network with each other, get information, find solutions, develop projects, and fulfill their customer’s needs.

Manufacturers and Suppliers Concrete Coating Services: If your company manufactures or sells Decorative Concrete Coating products, advertise on the forums and get results! Reach the thousands of contractors that visit this web site each month. For information on how to advertise on the web site fill our contact forms.

Concrete Coating Contractors Services: Get listed on the largest directory of Decorative Concrete Coating Contractors on the web. Our site generates over 30,000 visitors per month, with many of them coming to our site to find a contractor for their project. Prospective customers navigate through a very easy and fast interface that provides quick results for their searched area and it gives them freedom to look as far as they want quickly and effectively. Let Architects and General Concrete Coating Contractors learn about you and your company through your listings, let homeowners easily find you and increase your revenues by selling more.

Home Owner Services: Find a concrete coating contractor, get detailed information on the products available and the application process. Find the concrete coating contractor you need on our listings or post your project description to get qualified contractors to contact you. Though our contractor database is by location, many contractors travel far, by using both the Concrete Coating contractor locator and posting your information in the lead generator you will maximize your chances to get more contractors to bid on your project.

In the Forums you can also find a Decorative Concrete coating Contractor that specializes on Stamped Concrete Coating, Acid Stain, Concrete Coating  Countertops, Overlays and more.

Epoxy garage floor coating | Concrete Polishing | Concrete Resurfacing

If you recently ripped out carpet, tile, or linoleum, or your pool deck and driveway are all cracked up, there is a remedy. Concrete Coating staining, polishing, and concrete overlays make your existing concrete beautiful again.

Concrete Coating Staining

For a mottled, variegated look, concrete staining is the way to go. We have a wide pallete of colors to match any architectural style. Choose either glossy or satin finish. Concrete staining, interior or exterior, is an easy way to add value to your property.

Concrete Polishing

Concrete polishing means grinding your concrete floors with finer and finer grit diamonds. Concrete polishing leaves a smooth, glossy interior floor that lasts for years. Polished concrete can also be stained. Polished concrete is for interiors, only.

Concrete Resurfacing

Concrete resurfacing is a way to turn your messed up slab into a fresh canvas. We apply a thin concrete microtopping that can be changed to the natural look of flagstone, slate, or marble without the expensive mess. We can also create a sleek, ultra modern look. Every slab becomes a unique, one-of-a-kind bit of art that reflects the personality of its owner.

Concrete Coating Finishing

Whether you want glossy, haute-couture floors or a natural, satin finish, Coolstone Concrete Design and Resurfacing can create it for you. All without expensive tear-out and demolition.

www.marbleshooters.net

Some benefits of concrete coating resurfacing:

1. About half the cost of tear-out and pouring new

2. Hypoallergenic concrete coating

3. Eco-friendly concrete coating, with less natural resources used in production

4. Completely customizable concrete coating

5. Easy to clean concrete coating

GARAGE FLOOR CONCRETE COATING FINISHES FROM LEAST TO MOST DESIRABLE:

Painted garage concrete coating floor this type finish is readily available at your local big box store. Before applying all surfaces need to be thoroughly cleaned. Floor should be acid etched to ensure proper bonding. The concrete coating is then rolled on applying at least 2 coats. If proper cleaning and etching is not done this type finish can peel within a few weeks. Lifespan for a properly prepared floor is in the one to two year range. Installation time 3 – 5 days allow a minimum of 72 hours before driving on.

Epoxy Paint also readily available at big box stores. These finishes are slightly more durable than concrete paint. This product is generally water based and comes in a two part kit. Your garage floor needs to be prepared as above. Product is the rolled on with a minimum of 2 coats. If vinyl chips are applied they should be top-coated.Typical lifespan is 2 – 5 years. Installation time 3- 5 days allow a minimum of 72 hours before driving on.

100% solids epoxy garage floor. This type finish has long been the standard for professional garage concrete coating floor finishes. The floor should be prepared using a grinder to remove containment’s and profile the floor for proper adhesion of the epoxy. A minimum of 2 coats needs to be applied. If vinyl chips are applied a third top coat should be applied, Epoxy floor concrete coating are inert to many household products.
This finish will usually come with a 2 – 3 year warranty. Installation time 3 – 5 days allow a minimum of 72 hours before diving on.

Polyaspartic garage floor. Polyaspartic garage floors are the new industry standard. This finish is 4 times more abrasive resistant than epoxy. They are chemical resistant and gas, oil or grease are easily cleaned from the surface. The floor needs to be mechanically etched before application. A minumum of two coats are applied. Generally a full broadcast of vinyl chips is used. Giving your floor a unique look and adding a high level of slip resistance. Installation time is 1 day and you garage contents can be back in your garage 2-3 hours after the final coat. You can drive on the floor the next day. This finish generally comes with a 10 year warranty.

Cleaning concrete is easy and is an important step towards prolonging the life of your beautiful floors, countertops, patios, or other polished concrete. Here are some tips for cleaning your concrete to keep it
looking beautiful. Regular maintenance and concrete cleaning are necessary to keep your concrete looking as fresh and beautiful as the day it was finished. Over time, dirt that is not removed from the surface of the concrete will make its way further into the concrete and could cause significant damage. Don’t waste thousands of dollars refinishing your concrete if you don’t have to. Your local contractor can introduce you to many affordable methods of cleaning your concrete and restoring it to its original beauty and luster

Concrete Coating

Indoor concrete (light cleaning) –
When beverages and other liquids are spilled on concrete, they may leave noticeable spots. Usually soap and water will be enough to clean cola, coffee, and other beverages out of your concrete. For tougher spots, your contractor can help. Cleaning tough spots without ruining the paint, epoxy and stamping on your floor is a delicate project that requires special cleaners and tools; cleaners that are tough enough to get out the stain, yet gentle enough to keep your decorative floor intact.

If your concrete has become dirty with mold and mildew, identified by patchy black spots, don’t lose hope, this too can be cleaned with the help of your contractor. Mold and mildew can spread throughout your home quickly and mold spores can cause many illnesses including asthma and irritable bowel syndrome. If you suspect that you have mold or mildew on your concrete, be sure to contact a contractor immediately before your family’s health is impacted. Since mold and mildew are caused by moisture, your contractor may also check the surrounding area for any leaks that could be causing the excess moisture.

Epoxy garage floor coatingOutdoor concrete sealer coating 

(heavy cleaning)
When dirt, dust, and grime collect on your outdoor concrete coating surface, it may begin to look black or brown in appearance. Whether you’ve got tobacco stains, charcoal, soil or other outdoor debris on your concrete, your contractor knows how to get it out without leaving any indication that it ever existed. Sometimes, black or brown spots on your concrete can be oily—especially on concrete used in a garage or as a driveway. Because oil and grease are so difficult to remove from concrete, harsh and toxic chemicals are used. Calling in a contractor is imperative since the harsh chemicals may damage your concrete or your health if not handled properly.

cleaning grease and oil from concrete coating
For many difficult stains and dirt spots, steam cleaning and water blasting are safe, non-toxic and effective cleaning methods. The equipment used for steam cleaning and power cleaning can be unwieldy and expensive. Additionally, too much concentrated focus with a power washer on your finished concrete could damage the paint or stamping on the surface. Your contractor has all the appropriate equipment and experience to clean these stains without damaging your concrete coating.

We are expanding and developing many new techniques and products for the Concrete Polishing Industry. The industry is in a crucial point as there are many contractors that do subpar work and call it “Concrete Polishing.” Thus a need for an independent technical institute that “IT IS THE INTENT OF THE INSTITUTE to establish standards through accreditation, and to provide quality education and support for Architects, Engineers, General Contractors, Property Owners want a concrete coating, Interior Designers, and Concrete Processing/Polishing Contractors/ concrete coating conttactors

The Concrete Polishing Association of America has also:

  1. ✓Defined the processing process and its complexities.

 

  1. ✓Defined the functional and aesthetic advantages and disadvantages of ground, honed and polished concrete.

 

  1. ✓Defined the flooring options available when processing concrete to a desired finish.

 

  1. ✓Brought true craftsmanship and professionalism to the concrete processing industry through contractor evaluations, accreditations and training.

 

  1. ✓Developed written specifications that provide the desired results for the customer to include the concrete mix design, placement, finishing, joint layout, the ground, honed or polished finish to protection.

Provided tools for contractors to further develop their business in sales, marketing, estimating, business operations and development, including meeting the American Institute of Architects (AIA) Continuing Education System (CES) credit requirementsfor concrete coating

Progressive Concrete Coatings in Wilmington, NC

Stained Concrete Coating

This retail store’s beach and ocean theme was enhanced with a variegated concrete  coating floor. Using a turquoise acid stain, Matt Hine of Progressive Concrete Coatings in Wilmington, NC, was able to incorporate the aqua color of the store’s logo into the concrete Coating.

Concrete sealer
Finished concrete saves energy in several ways. In the summer time, a slab in contact with the ground draws the earth’s own natural cooling abilities into the buildings concrete coating. In the winter, if a building has been designed to expose the slab to natural sunlight, it will soak up this radiant heat. Then at night the slab will release the heat into the building to provide a more uniformly warmer interior. Both of these are examples of concrete’s inherent thermal mass capability, which save money on heating and cooling costs for concrete coating

New floors

New Concrete Coating

New floors require less work resulting in lower costs, but there are a few things to be aware of before a new concrete floor can be polished. Firstly the slab can contain a decorative aggregate. The two most common aggregates are river stone, granite, and black basalt mix, however the aggregate can be almost anything. The finished surface of the concrete will need to be finished to a high standard to facilitate the polishing process. During the finishing phase any decorative aggregates such as seashells or car parts can be dropped into the surface of the concrete. Builder needs to be aware as early as possible if the concrete is to be polished so that the final finish is of the best quality.

Retrofit Concrete Coating floors

Retrofit Concrete coating floors can be done in two ways. The existing floor slab can be cut or sanded and the natural aggregate will be the feature or a topping slab with a minimum thickness of 50 mm can be added on top of the existing Concrete Coating.

The short answer to concrete polishing is that it’s the best way to turn a floor that looks like it was poured for a garage into a concrete polishing floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like marble!dedication to detail, state of the art equipment, and pride taken in workmanship are why you need to call on Marble Shooters for your  Concrete Polished needs. At Marble Shooters we work around your busy schedule, causing little or no down time. Experience, reliable, and efficiency add to making your decision to hire Marble Shooters the right decision. New concrete or existing, clear application or dyed our customers are amazed with the finish Marble Shooters is capable of producing a great concrete coating

The Kings Of Concrete Coating Installation and Marble Shooters. We Are Best in Kingdom and County. PERHAPS THE WORLD!

We spend hours every day researching and applying the latest in lasting durable and beauitful concrete finishes. We have more than one opition for your floor. So we are confident that we can help you to make the correct choice. We will make the garage  concrete coating your warehouse concrete coating or your living room the easiest surface to clean and perhaps the most beautiful! We are a family owned business and we share over 50 years of working knowledge. Your satisfaction means everything to us. We take pride in our workmanship and count on your referrals for more than 70% of our business. We are AA rated with the better bussiness bureau and licensed with the State Of California. Most durable concrete coating

Concrete  coating  or coatings are one of the most resilient types of construction material but undoubtedly; it is also vulnerable to destruction. In time, there will be damages on its surface that leaves very unwanted and unsafe conditions. As a natural resort, people will replace it with a new one. But wait, innovated machinery and highly improved technology allows us to do things that were not available and possible before. Now, we can repair and improve damages by simply resurfacing it. With this move, we can economize and have a practical solution that is of high-quality and excellent durability on your concrete floorAt present, establishments in Los Angeles and Orange County are resorting to many innovative methods to preserve their investments. They want every part of their facilities be made of the best materials and installed with meticulousness. Concrete Floorings are very important part of structures because they are constantly exposed to wear and tear. Nowadays, various types of floorings are found in the market and one of the highest in-demand is  a clear concrete coating.

Here is the edited text.

MARBLE SHOOTERS
THE KINGS OF CONCRETE
The truth of the matter is to make an informed decision you need two things;
Knowledge and Choices. We can provide you both; with over twenty years of
experience in concrete & stone we have seen it all and tried it all. From
initial concrete design, to color and pattern cuts, together we will design the
perfect floor for you.
With options ranging from Polished, Stained, Dyed, and Coated Concrete we can
provide the solution that is custom tailored to your specific needs.
Please review our pictures by clicking on the icons below. If you would like a
free estimate or if we can assist in answering any questions you might have
please do not hesitate to call or email. It is our pleasure to serve you.

Options

Polished Concrete:
We transform your existing concrete slab into a high shine, low maintenance work
of art.  Using the latest technological advancements such as: Diamond grinders,
concrete consolidators, dyes, stains, and sealers, we can turn your concrete
into a unique work of art. Offering the look and durability of stone without the
extensive maintenance or high price tag.

Concrete Coatings:
When it comes to coatings, not all flooring is created equal. Many competitors
or big-box stores use low grade coatings that are designed to keep costs down
instead of perform or last.  We use all industrial grade products that are
designed to cover, seal, and enhance your existing concrete slab.  Our 100%
solids epoxy is the base of our chip system and is sealed with a two-part
solvent based polyurethane top coat that is impervious to UV rays, oil, and even
hot tires. Providing a superior floor covering that is guaranteed to last.

Stain & Sealed Concrete coating:
Staining and sealing is the most affordable way of transforming your existing
concrete into a finished floor. Using an acrylic color, dye, or acid stain we
can quickly convert your old dingy concrete slab to a beautiful piece of
decorative concrete. You can even choose your finishes; from matte, satin, all
the way to high gloss. Sealer choices include: Acrylic, Epoxy, Impregnator, or
Polyurethane. Stain & Sealed Concrete coating is the must have option for all the bare
concrete in your life.

Design Concrete Coating
Using saw cuts and multiple color schemes we can create a personalized work of
art that will have people second guessing on what kind of surface they are
looking at.  Patterns and colors can be tailored to make everything from shapes
to logos.  Helping re-create the beauty and uniqueness of stone that will no
doubt leave a lasting impression with everyone that viewsyour concrete coating.

Why Concrete Floors Are Pet-Friendly

 

 

Pet friendly flooring

 

Dear Roy,

 

Your clients who have pets consider them to be important members of the family, and will often think about the needs of their four-footed companions when choosing the flooring materials they use in their home. This is a great selling point for concrete, since few flooring materials are friendlier to pets and their owners than concrete. Not only do concrete floors stand up well  to claws and muddy paws, they can also contribute to pet comfort and health.

 

Sealed floor1) They resist pet stains and odors.
When the pores in concrete are sealed with a protective film-forming sealer or floor finish, pet urine can’t seep into the floor and leave behind lingering odors and stains.
2) They are easy to clean.
When family pets shed fur or race through the house with rain-soaked or muddy paws, cleaning up after them is no sweat if the  floors are concrete. Tell homeowners that they can simply give the floor a few swipes with a broom, towel or mop, and the mess is history. See Caring for Concrete Floors.3) They won’t trap pet dander, fleas or mites.
In addition to fur, pets shed animal dander that can aggravate allergies in people who are sensitive. Smooth floor surfaces like concrete won’t trap this dander the way carpet will, making the dander easy to remove during routine cleaning. Concrete floors also won’t harbor fleas or mites that pets may carry into the home. (For more information, watch the video Controlling Allergen)4) They are nontoxic.
Synthetic carpets can emit volatile organic compounds, or
VOCs, as can some carpet adhesives and padding. Some of
the adhesives used under vinyl sheet goods and linoleum can
also emit VOCs. Concrete floors, stained with nontoxic
pigments, do not release VOCs that can be harmful to homeowners as well as their pets.Radiant heating cables5) You can heat them.
Because hot air rises, many homes tend to be colder at floor level. And since that’s where pets spend most of their time, the ability to warm up concrete floors with radiant heating will keep them comfortable while saving the homeowner big money on energy bills.6) They are scratch resistant.
Rambunctious pets and their claws can really scratch up hardwood flooring. Concrete floors are inherently scratch resistant, and when protected with a good sealer or floor wax, they are virtually scratchproof. View this chart comparing the performance of concrete sealers.

 

More department stores, manufacturing companies, hotels, restaurants and even airports are using the Polished Concrete. This just proves that that more people sees the benefits and beauty of concrete polishing. It also goes to say that concrete polishing does not have to be confined in doors, it can also be used out doors.

Dull gray cement floors are gradually changing into a work of art. As more people enjoy the beauty of concrete polishing, day by day there are new ways to enhance it. Just to site a few, you can stain it, add die to it, and arrange glass, nails or bolts to create a design. You can even have your concrete floor engraved. Poly urthane concrete coating top coat industrial coating.

Concrete Coating Concrete Polishing for concrete floor is a process for turning a concrete floor into a highly abrasion resistant, incredibly dense, smooth and visually appealing surface.

Polished Concrete Floors

www.thekingsofconcrete.com

Concrete has long been known for its durability and cost-saving features. With modern technologies, homeowners and business owners are finding they can harness these advantages of concrete in their floor along with many other added benefits. Polished concrete is a popular alternative to other flooring materials because of three noteworthy benefits: lower total cost, lower maintenance, and aesthetics.

Polished concrete’s superior durability and performance have made it a top finish for retail stores, warehouses, office facilities, and municipalities. Homeowners, as well, are selecting these smooth, high-luster floors that imitate the look of polished stone.

Polished concrete floors are very economical. Unlike many other floor surface materials, a polished concrete floor can last up to ten years or longer before it needs to be refinished. Maintenance on a polished floor is also minimal, thereby reducing costs associated with keeping floors clean, durable, and traffic-friendly.

Polished concrete floors are striking in appearance. The exposure of the aggregate in the concrete unveils a look of stone. There are a variety of colors available on the market to stain or in some other way modify the color and look of the polished floor. There are also various levels of sheen depending on the degree of reflectivity and shine that is desired or a concrete Coating

Concrete Coating

Acid stain works by penetrating the concrete surface and reacting chemically with the concrete. This makes it a permanent part of the concrete. The stain does not wear off the surface like a concrete sealer or a concrete paint does, eventually.

All concrete floors accept stains differently. This creates natural color variations that are unique to each floor.

Most acid stains mimic earth tones like tan, brown, terra cotta, blues, and green. They are also translucent, meaning the condition of the concrete they are applied to has to be taken into consideration before staining your concrete coating

Finding an epoxy coating that is compatible with a high pH can be a challenge—and if we were in a bar I would give you a couple of names—but the rules don’t let me tell you manufacturers names here. Suffice it to say, if they are foreign sounding and very expensive they will probably work. There are also some pretty impressive “domestic” technologies that involve treating concrete slabs with lithium penetrants that plug capillary pores and neutralize alkali’s that then get top-coated with epoxy coatings. What we have learned the hard way is that acid neutralizing does not work nor does using calcium silicate-based penetrants. The acids leave salt residues and the calcium silicates don’t completely react leaving behind the alkali’s we were worried about in the first place. On a positive note, calcium silicate-based penetrants do clog up the capillary pores—i.e. cause “arterial sclerosis” for concrete and do reduce vapor emissions—but they should be limited to concrete slabs that do not get covered with impermeable floor finishes. So they are pretty good for exposed concrete floors that will remain exposed concrete coating

One of the most difficult (if not the most difficult) problems in the industry is edge work. Anyone who has done any concrete polishing will tell you that there is still no good solution for edges. Oftentimes, the edge work will end up being done by hand, and it is an art in itself to learn to blend the edges in with the rest of the floor. Many contractors won’t take jobs with relatively small amounts of square footage if there will be a great deal of edge work. You definitely want to take into consideration the amount of time you will spend doing edges in relation to the square footage of the job. Also, make sure the customer understands the nature of the beast with edges, their impact on price, and what to expect as far as aesthetics. Installing epoxy on the edges is often a great alternative to polishing them, but even with epoxy, you will still have to do some light grinding on the edges and prep them.

Most existing concrete has been abused. Chips will not go away entirely unless you grind away a great deal of concrete at a great deal of expense. Concrete in poor condition will require more labor and will have more flaws. Concrete in poor condition will also be rough on your tools. These flaws won’t necessarily look bad. They are what I consider to be part of the natural element in concrete, like the natural elements in a slab of marble or granite. However, the customer needs to know exactly what to expect, and you can’t price these jobs too low.

The waviness of the concrete will very much affect the ease of polishing and the outcome of your job. Wavy concrete floors are nothing rare. Some spots will be hard to reach, and your floor will require more work to be finished and will still not have an even look at the end. Unless you have a controlled pour, let the customer know that aggregate will vary a great deal throughout the floor. Expect to see large aggregate pieces in the joints and high spots and smaller aggregate in the rest of the floor. Make sure the customer understands this before you agree to do the job. The higher your high spots, and the more you need to grind them down, the larger the visible aggregate will be in those areas. Steer away from dealing with exposed aggregate on wavy floors.

Laser-leveled concrete is much easier to polish. You can charge less for these floors. Most of the new concrete poured for industrial or commercial use now is laser-leveled. It is in renovation work that you are more likely to run into wavy floors.

Some of the concrete floors poured now are also power-troweled to the point of being overtroweled for polished concrete. Some concrete is so overtroweled that it is almost burned, and it is either extremely difficult to polish or cannot be polished. Make sure you don’t make a commitment to polish a floor that cannot be polished.

When VCT (vinyl composite tile) is taken up, it often leaves ghost lines. These lines may not go away. Your customer will need to be aware of this ahead of time.

Soft concrete will cost you more to polish than hard concrete. You should perform a hardness test before pricing any job. Soft concrete will require hard metal-bond diamond tooling. That tooling will still wear out faster, so you’ll go through more of it — in some cases, a great deal more of it. This holds true for your metal-bond and your resin-bond diamond tooling, adding cost to your job.

If your customer is requesting an exposed aggregate floor, make sure they understand the aggregate will not be evenly exposed. What already lies within the concrete, as it lies there, will be exposed. Also make sure you charge considerably more, as more labor and tooling will be required. If the concrete floor is uneven or wavy, this will become even more of an issue. If it were me, I’d have a customer sign off on such work. In today’s environment, it is wise to make sure that everyone is on the same page. You don’t want to end up in a lawsuit over unrealistic expectations. It’s always better to underpromise and overperform.

Take into consideration dust as well as possible labor expenses for cleaning. Whether a vacuum system can make concrete grinding and polishing 99 percent dust-free is questionable. There will be dust, and quite a bit of it. In a setting such as an airport, retail store, or anywhere else where the public will encounter the dust, you must make sure you minimize this issue. You may have to clean at the end of every day. Understand that the last thing the end user needs is a lawsuit, not to mention the appearance of a very dusty environment. Also make sure your employees have dust masks available to them. Concrete dust can cause silicosis.

These are all good things to keep in mind while you are pricing your first concrete polishing jobs. You will get better and better at it as you gain experience. Just as it is true that concrete polishing is an art that has to be learned with experience, pricing a concrete coating

Anti Allergic

Garage Floor Coating,Garage Floor Coatings Polishing Garage Floor Coatings and Staining

Continue reading Garage Floor Coating,Garage Floor Coatings Polishing Garage Floor Coatings and Staining