Category Archives: Orange County Los Angeles

Orange County Polished Concrete, Orange County Garage Concrete Flooring, Concrete Polishing Orange County

Orange County Polished Concrete. Orange County Concrete Grinding. Polished concrete flooring is hot. Orange County polished concrete. Airplane hangars to polished concrete industrial floor prep. Polished concrete?  We do polished concrete throughout Orange County and Los Angeles Areas. A Perfect polished concrete floor is the goal. Polished concrete in Orange County and Los Angeles also San Diego. Concrete floor resurfacing with www.thekingsofconcrete.com.  Commercial polished concrete is often protected from wear and dusting with topical sealers and coatings. Resurfacing with these sealers and coatings can range in cost from 50 cents per s.f. for topical sealers, to $5 per s.f. for epoxy and urethane coatings. Compare coatings to polished concrete. Polished concrete prices will range from $3-7 per s.f. for a 3,000 grit finish based on size of the project and the number of obstacles. “A 3,000 grit finish includes the use of an impregnating sealer that reacts with the polished concrete and fills the surface voids,” says Roy.

Polished Concrete

949 387-5770

Polished Concrete Orange County is half to one third the cost of concrete flooring overlay concrete floor coatings, but that’s not where the savings really lie. “Polished concrete improves the overall quality of the floor resurfacing,” says Poinsettia Byrd with VIC International. The long-term maintenance costs can be astronomical for a commercial floor. Businesses such as manufactures, department stores, restaurants, and car dealers use polishing because coatings and sealers can have issues such as delaminating, staining and wear through. The life of some of these finishes can often be measured in months, resulting in constant up-keep. Polished concrete resurfacing produces an extremely dense, abrasion resistant surface that will not delaminate.

Polished concrete resurfacing surface may lose some of its shine over time in areas of heavy fork lift and foot traffic. The shine for polished concrete can be brought back with minimal aggravation and cost. The only maintenance a polished concrete floors will need is the removal of abrasives such as sand. Depending on the use of the floor, cleaning with a light detergent may also be needed. The service life of polished concrete cannot be determined as of yet since it is a fairly new process. But some existing polished concrete jobs that see heavy forklift traffic are over 5 years old and performing well with minimal maintenance.

Other benefits that commercial and industrial property owners see in polished concrete are reflectance, slip resistance, low VOC’s polished concrete Polished concrete resurfacing is expanding and developing many new techniques and products for the Polished Concrete floor Industry. The polished concrete industry is in a crucial point as there are many contractors that do subpar work and call it Polished Concrete resurfacing .” Thus a need for an independent Polished Concrete technical institute that “IT IS THE INTENT OF THE INSTITUTE to establish standards through accreditation, and to provide quality education and support for Architects, Engineers, General Contractors, Property Owners, Interior Designers, and Polished Concrete Resurfacing/Polished Concrete Contractors Resurfacing / Polished Concrete Resurfacing The Polished Concrete Resurfacing Association of America has also:

  1. ✓Defined the polished concrete processing process and its complexities.
  1. ✓Defined the functional and aesthetic advantages and disadvantages of ground, honed and polished concrete Resurfacing .
  1. ✓Defined the polished concrete flooring options available when processing polished concrete to a desired finisha.
  1. ✓Brought true craftsmanship and professionalism to the polished concrete industry through contractor evaluations, accreditations and training.
  1. ✓Developed written specifications that provide the desired results for the customer to include the concrete mix design, placement, finishing, joint layout, the ground, honed or polished concrete finish to protection.
  1. ✓Provided tools for polished concrete Resurfacing contractors to further develop their business in sales, marketing, estimating, business operations and development, including meeting the American Institute of Architects (AIA) Continuing Education System (CES) credit requirements for polished concrete resurfacing

Orange County Polished Concrete

This retail store’s beach and ocean theme was enhanced with a variegated concrete floor. Using a turquoise acid stain, Roy of The Kings Of Concrete floors was able to incorporate the aqua color of the store’s logo into the polished concrete resurfacing. Polished concrete resurfacing Finished concrete saves energy in several ways. In the summer time, a slab in contact with the ground draws the earth’s own natural cooling abilities into the building. In the winter, if a building has been designed to expose the slab to natural sunlight, it will soak up this radiant heat. Then at night the slab will release the heat into the building to provide a more uniformly warmer interior. Both of these are examples of concrete’s inherent thermal mass capability, which save money on heating and cooling costs of polished concrete resurfacing. New polished concrete floors

www.thekingsofconcrete.com

New Polished Concrete floor Resurfacing Slab

New floors require less work resulting in lower costs, but there are a few things to be aware of before a new polished concrete floor can be polished. Firstly the slab can contain a decorative aggregate. The two most common aggregates are river stone, granite, and black basalt mix, however the aggregate can be almost anything. The finished surface of the concrete will need to be finished to a high standard to facilitate the polishing process. During the finishing phase any decorative aggregates such as seashells or car parts can be dropped into the surface of the polished concrete. Builder needs to be aware as early as possible if the concrete is to be polished so that the final finish is of the best quality. Polished Concrete Retrofit floors Retrofit floors can be done in two ways. The existing floor slab can be cut or sanded and the natural aggregate will be the feature or a topping slab with a minimum thickness of 50 mm can be added on top of the existing slab.

Are Polished Concrete Floors Hard on the Feet?

  Yes, Polished concrete is a hard material and won’t cushion or “give” under bare feet.  

  • Polished Concrete hardness also contributes to its durability and abrasion resistance. In a commercial or warehouse setting, hard is good. You need a hard surface that can stand up to forklift traffic and heavy foot traffic.
  • For a residential floor, you can help cushion concrete with area rugs (which are easier to clean than wall-to-wall carpet).
  • While polished concrete may be hard, it’s not abrasive to the feet, especially if it’s polished or has a smooth finish.

The short answer is polished concrete is the best way to turn a floor that looks like it was poured for a garage into a floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like granite ! The short answer to Polished Concrete is that it’s the best way to turn a floor that looks like it was poured for a garage into a polished concrete floor that looks like it was designed for a palace. Imagine turning a plain concrete surface into a floor that gleams like granite !dedication to detail, state of the art equipment, and pride taken in workmanship are why you need to call on Marble Shooters for your Concrete Polished needs. At Marble Shooters we work around your busy schedule, causing little or no down time. Experience, reliable, and efficiency add to making your decision to hire Marble Shooters the right decision. New concrete or existing, clear application or dyed our customers are amazed with the finish Marble Shooters is capable of producing Polished Concrete in Orange County.

The Kings Of Polished Concrete and Marble Shooters. We Are Best in Kingdom and County. PERHAPS THE WORLD!

Orange County polished concrete

We spend hours every day researching and applying the latest in lasting durable and beauitful concrete finishes. We have more than one opition for your floor. So we are confident that we can help you to make the correct choice. We will make the garage your warehouse or your living room the easiest surface to clean and perhaps the most beautiful! We are a family owned business and we share over 50 years of working knowledge. Your satisfaction means everything to us. We take pride in our workmanship and count on your referrals for more than 70% of our business. We are AA rated with the better bussiness bureau and licensed with the State Of California for polished concrete Polished Concrete is one of the most resilient types of construction material but undoubtedly; it is also vulnerable to destruction. In time, there will be damages on its surface that leaves very unwanted and unsafe conditions. As a natural resort, people will replace it with a new one. But wait, innovated machinery and highly improved technology allows us to do things that were not available and possible before. Now, we can repair and improve damages by simply resurfacing it. With this move, we can economize and have a practical solution that is of high-quality and excellent durability on your concrete floorAt present, establishments in Los Angeles and Orange County are resorting to many innovative methods to preserve their investments. They want every part of their facilities be made of the best materials and installed with meticulousness. Concrete Floorings are very important part of structures because they are constantly exposed to wear and tear. Nowadays, various types of floorings are found in the market and one of the highest in-demand for polished concrete . Here is the edited text. MARBLE SHOOTERS THE KINGS OF CONCRETE The truth of the matter is to make an informed decision you need two things; Knowledge and Choices. We can provide you both; with over twenty years of experience in concrete & stone we have seen it all and tried it all. From initial concrete design, to color and pattern cuts, together we will design the perfect floor for you. With options ranging from Polished, Stained, Dyed, and Coated Concrete we can provide the solution that is custom tailored to your specific needs. Please review our pictures by clicking on the icons below. If you would like a free estimate or if we can assist in answering any questions you might have please do not hesitate to call or email. It is our pleasure to serve you. Options Polished Concrete: We transform your existing concrete slab into a high shine, low maintenance work of art. Using the latest technological advancements such as: Diamond grinders, concrete consolidators, dyes, stains, and sealers, we can turn your concrete into a unique work of art. Offering the look and durability of stone without the extensive maintenance or high price tag. Concrete Coatings: When it comes to coatings, not all flooring is created equal. Many competitors or big-box stores use low grade coatings that are designed to keep costs down instead of perform or last. We use all industrial grade products that are designed to cover, seal, and enhance your existing concrete slab. Our 100% solids epoxy is the base of our chip system and is sealed with a two-part solvent based polyurethane top coat that is impervious to UV rays, oil, and even hot tires. Providing a superior floor covering that is guaranteed to last. Stain & Sealed Concrete: Staining and sealing is the most affordable way of transforming your existing concrete into a finished floor. Using an acrylic color, dye, or acid stain we can quickly convert your old dingy concrete slab to a beautiful piece of decorative concrete. You can even choose your finishes; from matte, satin, all the way to high gloss. Sealer choices include: Acrylic, Epoxy, Impregnator, or Polyurethane. Stain & Sealed Concrete is the must have option for all the bare concrete in your life. Design: Using saw cuts and multiple color schemes we can create a personalized work of art that will have people second guessing on what kind of surface they are looking at. Patterns and colors can be tailored to make everything from shapes to logos. Helping re-create the beauty and uniqueness of stone that will no doubt leave a lasting impression with everyone that views it.

www.thekingsofconcrete.com
Why Concrete Floors Are Pet-Friendly

Orange County polished concrete
Polished Concrete,

Your clients who have pets consider them to be important members of the family, and will often think about the needs of their four-footed companions when choosing the flooring materials they use in their home. This is a great selling point for concrete, since few flooring materials are friendlier to pets and their owners than concrete. Not only do concrete floors stand up well to claws and muddy paws, they can also contribute to pet comfort and health.

Sealed floor1) They resist pet stains and odors. When the pores in concrete are sealed with a protective film-forming sealer or floor finish, pet urine can’t seep into the floor and leave behind lingering odors and stains. 2) They are easy to clean. When family pets shed fur or race through the house with rain-soaked or muddy paws, cleaning up after them is no sweat if the floors are concrete. Tell homeowners that they can simply give the floor a few swipes with a broom, towel or mop, and the mess is history. See Caring for Concrete Floors.3) They won’t trap pet dander, fleas or mites. In addition to fur, pets shed animal dander that can aggravate allergies in people who are sensitive. Smooth floor surfaces like concrete won’t trap this dander the way carpet will, making the dander easy to remove during routine cleaning. Concrete floors also won’t harbor fleas or mites that pets may carry into the home. (For more information, watch the video Controlling Allergen)4) They are nontoxic. Synthetic carpets can emit volatile organic compounds, or VOCs, as can some carpet adhesives and padding. Some of the adhesives used under vinyl sheet goods and linoleum can also emit VOCs. Concrete floors, stained with nontoxic pigments, do not release VOCs that can be harmful to homeowners as well as their pets.Radiant heating cables5) You can heat them. Because hot air rises, many homes tend to be colder at floor level. And since that’s where pets spend most of their time, the ability to warm up concrete floors with radiant heating will keep them comfortable while saving the homeowner big money on energy bills.6) They are scratch resistant.Scratch-resistant floor Rambunctious pets and their claws can really scratch up hardwood flooring. Concrete floors are inherently scratch resistant, and when protected with a good sealer or floor wax, they are virtually scratchproof. View this chart comparing the performance of concrete sealer.
  • Polished Concrete Anaheim
  • Baldwin Park
  • Banning
  • Polished Concrete Shady canyon
  • Beverly Hills
  • Burbank
  • Cathedral City
  • Cathedral City
  • Corona
  • polished concrete Costa Mesa
  • Cypress California
  • Diamond Bar California
  • Downey California
  • Fullerton California
  • Garden Grove California
  • Glendale
  • Glendora California
  • Polished concrete West Hollywood California
  • Polished concrete Huntington Beach
  • Inglewood California
  • Polished concrete Irvine California
  • Polished concrete Laguna Hills Beach
  • Loma Linda
  • Polished Concrete Los Angeles
  • Mission Viejo California
  • Polished concrete Newport Beach
  • Norco California
  • Ontario
  • Palm Springs
  • Pasadena California
  • Rancho Cucamonga
  • Redlands
  • Riverside
  • San Dimas California
  • San Juan Capistrano
  • Santa Ana
  • Santa Clarita California
  • Santa Monica
  • Seal Beach California
  • Polished concrete West Covina California

More department stores, manufacturing companies, hotels, restaurants and even airports are using the Polished Concrete. This just proves that that more people sees the benefits and beauty of concrete polishing. It also goes to say that concrete polishing does not have to be confined in doors, it can also be used out doors. Dull gray cement floors are gradually changing into a work of art. As more people enjoy the beauty of concrete polishing, day by day there are new ways to enhance polished concrete. Just to site a few, you can stain it, add die to it, and arrange glass, nails or bolts to create a design. You can even have your polished concrete floor engraved.

Concrete Polishing – Getting Your
Orange County polished concrete
When people think of Polished Concrete, they often picture a drab, grey material used for the foundation of homes, unfinished basements and sidewalks; but consider the concrete floors that you see in large retail stores and in many industrial areas.These industrial strength floors are durable, decorative, and beautiful. With the help of your local contractor your dreams of having an attractive, very low maintenance flooring option is within your reach. When you choose concrete for your floors, driveway, garage or patio, you are limited only by your imagination. These floors can look as intricate as stone, as decorative as tile, and as creative as abstract art.
Homeowners everywhere are beginning to understand all of the advantages that concrete polishing has to offer. With the help of your local polished concrete contractor, you can take dull and drab concrete and turn it into a shiny and lustrous floor with a long life and durable surface. Your polished concrete contractor will use his or her tools and expertise to polish your concrete, making it less porous and more beautiful than you ever imagined. Now you don’t have to rip out and replace old flooring every few years – concrete polished concrete changes all that! Concrete Polishing for concrete floor is a process for turning a concrete floor into a highly abrasion resistant, incredibly dense, smooth and visually appealing surface on polished concrete

Polished concrete has long been known for its durability and cost-saving features. With modern technologies, homeowners and business owners are finding they can harness these advantages of concrete in their floor along with many other added benefits. Polished concrete is a popular alternative to other flooring materials because of three noteworthy benefits: lower total cost, lower maintenance, and aesthetics. Polished concrete’s superior durability and performance have made it a top finish for retail stores, warehouses, office facilities, and municipalities. Homeowners, as well, are selecting these smooth, high-luster floors that imitate the look of polished stone. Polished concrete floors are very economical. Unlike many other floor surface materials, a polished concrete floor can last up to ten years or longer before it needs to be refinished. Maintenance on a polished floor is also minimal, thereby reducing costs associated with keeping floors clean, durable, and traffic-friendly. Polished concrete floors are striking in appearance. The exposure of the aggregate in the concrete unveils a look of stone. There are a variety of colors available on the market to stain or in some other way modify the color and look of the polished concrete floor. There are also various levels of sheen depending on the degree of reflectivity and shine that is desired. Comparative Installation and Maintenance Costs for Polished Concrete Floors Based on a survey conducted by the National Terrazzo and Mosaic Association, the information below compares the cost per square foot of commonly used commercial flooring materials and polished concrete floors. This recent examination of flooring costs over a 20 year span illustrates not only some of the hidden costs involved in the purchase and installation of various materials, it also illustrates the dramatic difference in the cost of these materials. Costs per Square Installed Annual Years Replacement Total Exp. Cost PSF Foot Cost Maint. Av. Life Cost 20 Years /Year Vinyl Sheet Flooring $2.72 $1.39 9 $3.43 $38.14 $1.91 Vinyl Tile Flooring $1.23 $1.47 15 $1.60 $32.76 $1.64 Ceramic Mosaic Tile $6.48 $1.22 20 $30.88 $1.54 Quarry Tile $5.78 $0.58 20 $30.18 $1.51 Cement Terrazzo $8.50 $0.46 20 $20.10 $1.01 Granit-Glaze $6.50 $0.46 20 $15.70 $0.79 PolishedCrete $3.98* $0.00 20 $3.98 $0.19  1. Construction of a structure with a stained concrete floor is really no more difficult or demanding than the case of any other flooring as long as a few common sense rules are observed to preserve the natural beauty of the polished concrete. 2. Do not mark or discolor the floor with paint, siliconeoil, plumbers glue, purple primer, masking tape, gasoline, sheetrockmud, red or blue chalk, grease pencil, magic marker, ink pens, and anything else you would not get all over a hardwood floor.We do have techniques that can remove some of these blemishes, however, this will not yield perfect results, it is costly and should be avoided. 3. Driving nails into the floor for wall braces will result in big ugly holes when you remove the nails. Plan “A” do not drive nails into the floor, plan “B” if you drive a nail into the floor “DO NOT REMOVE IT!!!” We can remove them without making the big ugly holes. We suggest bracing the walls by nailing the foot of the brace to the baseplate of the opposite wall. 4. Never pour acid of any kind on the floor. Acid will neutralize the lime in the concrete making it inert and unstainable. 5. Avoid cutting plywood,siding, USB etc. on a 2×4 laying on the polished concrete. The blade can strike the concrete when the plywood flexes making ugly irregular scoremarks on the concrete. 6. Never put tape on the floor! Tape will pull up tiny particles from the concrete surface when it is removed. When these areas are stained they will be darker than the rest of the floorand shaped exactly like the piece of tape that was on the polised concrete. 7. Do not leave nails or other metal objects on wet polished concrete. The nails will rust and leave nail shaped dark red spots on the floor. Similar blemishes can occur if lumber is left lying on the concrete in wet conditions. 8. Orange chalk should be used to srike lines for laying out walls etc. The good thing about orange chalk is that water washes it away completely. Never use blue chalk as it cannot be removed and can easily be seen through most polished concrete stain colors. Red chslk is also permanent and should be avoided on polished concrete It used to be the only place you saw concrete floors without some kind of covering was in industrial settings, in the garage, or maybe an unfinished basement. People used to think that concrete floors looked cheap, like you couldn’t afford carpet or some other covering. Recently that has changed as more and more people are realizing that a polished concrete floor really looks great. Combine this with concrete etching and you can actually have a very artful look on your floors. One of the drivers behind polishing the floor instead of covering with carpet or tile is the current use of home heating systems embedded in the floor. These system pump hot water to all the ground floor rooms of the house and thus heat from the bottom up. This is the most efficient way of heating because heat rises so you don’t have to add extra energy to heat the air in order to get the floors toasty. Instead, the floor system heats up which increases the temperature in the first level rooms and then the warmth moves up through the house heating the remaining areas. If you are thinking about a polished concrete floor then your first choice will be whether or not you stain the floor. The polishing will work the same, but you can choose to either keep the traditional gray color or change it up with some other color you choose. Be aware though, if you stain the floor and then polish it you will have to remove the polishing and grind the concrete to get the stain back off if you change your mind later. So really think about whether you can stand to live with that blue or red floor for the next several years. Another option to think about is etching. This process involves removing the cement binder from the very top layer of the concrete which exposes the aggregate (rock) underneath. You can choose to do your entire floor this way or just etch the border or a design in the middle. Whichever way you choose to go, this will add a lot of character to the floor. Another use of concrete polishing is walls, counter tops, and even furniture. You may think that one or two walls in your living room with exposed concrete would look really cheap but in reality with the right accents it can look very chic. Polished Concrete counter tops are also becoming much more popular as people realize they are a lot cheaper than granite you can really add a nice touch in the kitchen with polished concrete. Acid stain works by penetrating the concrete surface and reacting chemically with the concrete. This makes it a permanent part of the concrete. The stain does not wear off the surface like a concrete sealer or a concrete paint does, eventually. All concrete floors accept stains differently. This creates natural color variations that are unique to each floor. Most acid stains mimic earth tones like tan, brown, terra cotta, blues, and green. They are also translucent, meaning the condition of the concrete they are applied to has to be taken into consideration before staining YOUR POLISHED CONCRETE Finding an epoxy coating that is compatible with a high pH can be a challenge—and if we were in a bar I would give you a couple of names—but the rules don’t let me tell you manufacturers names here. Suffice it to say, if they are foreign sounding and very expensive they will probably work. There are also some pretty impressive “domestic” technologies that involve treating concrete slabs with lithium penetrants that plug capillary pores and neutralize alkali’s that then get top-coated with epoxy coatings. What we have learned the hard way is that acid neutralizing does not work nor does using calcium silicate-based penetrants. The acids leave salt residues and the calcium silicates don’t completely react leaving behind the alkali’s we were worried about in the first place. On a positive note, calcium silicate-based penetrants do clog up the capillary pores—i.e. cause “arterial sclerosis” for concrete and do reduce vapor emissions—but they should be limited to concrete slabs that do not get covered with impermeable floor finishes. So they are pretty good for exposed concrete floors that will remain exposed polished concrete One of the most difficult (if not the most difficult) problems in the industry is edge work. Anyone who has done any concrete polishing will tell you that there is still no good solution for edges. Oftentimes, the edge work will end up being done by hand, and it is an art in itself to learn to blend the edges in with the rest of the floor. Many contractors won’t take jobs with relatively small amounts of square footage if there will be a great deal of edge work. You definitely want to take into consideration the amount of time you will spend doing edges in relation to the square footage of the job. Also, make sure the customer understands the nature of the beast with edges, their impact on price, and what to expect as far as aesthetics. Installing epoxy on the edges is often a great alternative to polishing them, but even with epoxy, you will still have to do some light grinding on the edges and prep them. Most existing concrete has been abused. Chips will not go away entirely unless you grind away a great deal of concrete at a great deal of expense. Concrete in poor condition will require more labor and will have more flaws. Concrete in poor condition will also be rough on your tools. These flaws won’t necessarily look bad. They are what I consider to be part of the natural element in concrete, like the natural elements in a slab of marble or granite. However, the customer needs to know exactly what to expect, and you can’t price these jobs too low. The waviness of the concrete will very much affect the ease of polishing and the outcome of your job. Wavy concrete floors are nothing rare. Some spots will be hard to reach, and your floor will require more work to be finished and will still not have an even look at the end. Unless you have a controlled pour, let the customer know that aggregate will vary a great deal throughout the floor. Expect to see large aggregate pieces in the joints and high spots and smaller aggregate in the rest of the floor. Make sure the customer understands this before you agree to do the job. The higher your high spots, and the more you need to grind them down, the larger the visible aggregate will be in those areas. Steer away from dealing with exposed aggregate on wavy floors. Laser-leveled concrete is much easier to polish. You can charge less for these floors. Most of the new concrete poured for industrial or commercial use now is laser-leveled. It is in renovation work that you are more likely to run into wavy floors. Some of the concrete floors poured now are also power-troweled to the point of being overtroweled for polished concrete. Some concrete is so overtroweled that it is almost burned, and it is either extremely difficult to polish or cannot be polished. Make sure you don’t make a commitment to polish a floor that cannot be polished. When VCT (vinyl composite tile) is taken up, it often leaves ghost lines. These lines may not go away. Your customer will need to be aware of this ahead of time. Soft concrete will cost you more to polish than hard concrete. You should perform a hardness test before pricing any job. Soft concrete will require hard metal-bond diamond tooling. That tooling will still wear out faster, so you’ll go through more of it — in some cases, a great deal more of it. This holds true for your metal-bond and your resin-bond diamond tooling, adding cost to your job. If your customer is requesting an exposed aggregate floor, make sure they understand the aggregate will not be evenly exposed. What already lies within the concrete, as it lies there, will be exposed. Also make sure you charge considerably more, as more labor and tooling will be required. If the concrete floor is uneven or wavy, this will become even more of an issue. If it were me, I’d have a customer sign off on such work. In today’s environment, it is wise to make sure that everyone is on the same page. You don’t want to end up in a lawsuit over unrealistic expectations. It’s always better to underpromise and overperform. Take into consideration dust on polished concrete as well as possible labor expenses for cleaning. Whether a vacuum system can make concrete grinding and polishing 99 percent dust-free is questionable. There will be dust, and quite a bit of it. In a setting such as an airport, retail store, or anywhere else where the public will encounter the dust, you must make sure you minimize this issue. You may have to clean at the end of every day. Understand that the last thing the end user needs is a lawsuit, not to mention the appearance of a very dusty environment. Also make sure your employees have dust masks available to them. Concrete dust can cause silicosis. These are all good things to keep in mind while you are pricing your first concrete polishing jobs. You will get better and better at it as you gain experience. Just as it is true that polished concrete OC is an art that has to be learned with experience, pricing a polished concrete